Remove the tape and packing material from the outside of the printer.
Open the output tray, and then open the cartridge access door.

番号 : Open the output tray and cartridge access door
Remove the tape and cardboard from inside the printer

番号 : Remove the packing materials from inside the printer
Close the cartridge access door.

番号 : Close the cartridge access door

Step 2: Check the contents of the box

The contents might vary by country/region. See the packaging for a list of items shipped in the box.

What if my printer has only one ink cartridge?

If your printer is the HP Deskjet 1011 Printer, it can print with one ink cartridge and ships with only an HP 802 Black Ink Cartridge. The information in this document still applies to your printer. To print in color, you can purchase and install an HP 802 or HP 802s Tri-color Ink Cartridge.

Step 3: Connect the power cord and adapter

Connect the adapter cord to the rear of the printer.
Connect the power cord to the power adapter, and then plug the power cord into an electrical outlet.
番号 : Connect the power cord

Connect the cord from the adapter to the rear of the printer

Connect the power cord to the adapter

Plug the power cord into the electrical outlet

Step 4: Turn on the power

Press the Power button to turn on the printer.

番号 : Turn on the printer

Step 5: Install the cartridges

Lower the output tray, and then open the cartridge access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before you continue.

番号 : Open the output tray and the cartridge access door
Remove the new cartridge from its package, and then carefully pull on the orange tab to remove the protective plastic tape.

注意:
Do not touch the copper-colored contacts or ink nozzles. Also, do not re-tape the cartridges. Doing so can result in clogs, ink failure, and bad electrical connections.

番号 : Remove the protective tape
Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot.
- The tri-color cartridge () goes in the slot on the left
- The black cartridge () goes in the slot on the right
番号 : Insert the cartridge into its slot
Push the cartridge forward into its slot until it snaps into place.

番号 : Push the cartridge forward
Repeat these steps to install the other cartridge.

番号 : Install the second cartridge
Close the cartridge access door.

番号 : Close the cartridge access door

Step 6: Load plain paper

Follow these steps to load plain paper into the printer.

Lift the paper tray.

番号 : Lift the paper tray
Lower the output tray, and then pull out the output tray extender.

番号 : Pull out the tray extender
Slide the paper width guide to its outermost position.
Load clean, white paper in the input tray with the short edge forward and the print side up.

番号 : Load the paper
Slide the paper width guide to the right until it stops at the edge of the paper but does not bend the paper.

番号 : Slide the paper width guide against the paper

Step 7: Align the cartridges

After you install the cartridges, follow the steps for your operating system to align the cartridges. If you do not align the cartridges now, the printer prompts you to do so the next time you try to print.

Windows

Press the Power button to turn on the printer, if it is not turned on already.
Open the HP printer software:
- Windows XP
  
  Click Start (), click All Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer ().
  
  補足:
  You can also open the HP software by clicking the printer's desktop icon ().
- Windows Vista
  
  Click the Windows icon (), click Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer ().
  
  補足:
  You can also open the HP software by clicking the printer's desktop icon ().
- Windows 7
  
  Click the Windows icon (), click All Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer ().
  
  補足:
  You can also open the HP software by clicking the printer's desktop icon ().
- Windows 8
  
  On the Start screen, click or tap the printer's tile. The software opens.
  
  補足:
  You can also open the HP software by clicking or tapping the printer's icon on the desktop ().
Click Maintain Your Printer, and then click the Device Services tab.
Click Align Ink Cartridges. The printer aligns the cartridges and then prints an alignment page.
Review the alignment page, follow the on-screen instructions to complete the alignment, and then click Done.

Mac OS X

Open the HP folder.
- From the Dock: Click the HP Utility icon (), click Devices, and then click your printer's name.
- From Finder: In the Finder navigation bar, click Go, and then click Applications.
Under Devices, select your printer, and then click the Align icon ().
Click the Align button. The printer aligns the cartridges and then prints an alignment page.
Review the alignment page, follow the on-screen instructions to complete the alignment, and then click Done.