hp-support-head-portlet

Azioni
Caricamento...
Assistenza clienti HP - Knowledge Base

hp-contact-secondary-navigation-portlet

Azioni
Caricamento...

hp-share-print-widget-portlet

Azioni
Caricamento...
  • Informazioni
    Crea un account HP oggi!

    Connettiti più rapidamente all'assistenza HP, gestisci tutti i tuoi dispositivi da un'unica posizione, visualizza le informazioni sulla garanzia e altro ancora. Per saperne di più

hp-concentra-wrapper-portlet

Azioni
Caricamento...

HP LaserJet MFP M232-M237 Printers - First Time Printer Setup

This document is for HP LaserJet MFP M234dwe and M234dw Printers.
To set up a printer for the first time, remove the printer and all packing materials from the box, connect the printer to a power source, download and install HP Smart or the printer software, connect the printer to a network, create an HP Account, and load paper.
Nota:
If you are looking for the printer software, go to 123.hp.com.

Step 1: View an overview video

Step 2: Remove the printer from the box

Remove the printer from the box, and then remove the packing material.
  1. Remove the printer and power cord from the box.
  2. Remove and recycle all packing material.
    Removing the packing materials
    Nota:
    Do not remove the toner cartridge from the printer. The printer is shipped with the toner cartridge already prepared for printing.

Step 3: Connect the power cord and turn on the printer

Plug the power cord into a wall outlet and turn on the printer.
Nota:
Do not connect a USB cable at this time.
  1. Connect the power cord to the rear of the printer, and then plug the other end of the power cord into an electrical outlet.
    Connecting the power cord
  2. Turn on the printer.
    Nota:
    HP+ printers must be connected to the internet (Wi-Fi or wired). If you want to use a USB cable, connect your HP+ printer to internet first, and then connect the USB cable as secondary connection.

Step 4: Install the printer software and connect the printer

Use the HP Smart app or HP Easy Start to help you set up the printer and connect the printer to a wireless network (preferred) or USB connection.
Nota:
An HP account is required, if you do not have an account, you can create one during the software installation process.

Step 5: Load paper, install the tray cover, and complete the setup

Load paper in the input tray and install the tray cover.
  1. Slide the paper guides to the edges of the input tray.
    Sliding the paper guides to the edges
  2. Load a stack of plain paper with the print-side facing up into the input tray, and then slide the stack forward until it stops.
    Nota:
    Load up to 150 sheets of paper with the print side facing up and the top edge toward the printer. If you are loading pre-punched paper, load the paper with the holes toward the left side of the tray.
    Loading paper into the input tray
  3. Slide the paper guides until they rest against the stack of paper.
    Sliding the paper guides inward
  4. Install the tray cover by grasping it with both hands, and then pushing it inwards until it snaps into place.
    Installing the tray cover
  5. Lower the tray cover and extend the output tray.
    Lowering the tray cover and extending the output tray

hp-feedback-input-portlet

Azioni
Caricamento...

hp-feedback-banner-portlet

Azioni
Caricamento...

hp-country-locator-portlet

Azioni
Caricamento...
Paese/area geografica: Flag Italia

hp-detect-load-my-device-portlet

Azioni
Caricamento...