hp-support-head-portlet

Azioni
Caricamento...
Assistenza clienti HP - Knowledge Base

hp-contact-secondary-navigation-portlet

Azioni
Caricamento...

hp-share-print-widget-portlet

Azioni
Caricamento...
  • Informazioni

    Si prega di fissare gli errori della stampa intermittente dello Spooler di Stampa che potrebbero condurre all’insuccesso dei lavori di stampa dopo un aggiornamento di Windows. Clicca qui.

hp-concentra-wrapper-portlet

Azioni
Caricamento...

Removing and Replacing the Battery for HP Pavilion dv6-7000, dv6-7100 and HP ENVY dv6-7200, dv6-7300 Notebook PCs

This document applies to HP Pavilion dv6-7x00 series and HP ENVY dv6-7x00 series notebook computers.
HP dv6-7x00 series notebook computer

Before you begin

  • Turn off the computer. Disconnect the Ethernet or modem cable. Disconnect the power cord.
  • Transfer the computer to a clear, flat, stable work surface over a non-carpeted floor.
  • HP strongly recommends the use of an anti-static wrist strap and a conductive foam pad when working on the computer.
  • Do not remove a component from its protective packaging until you are ready to install it.
  Avvertenza:
The edges of metal panels can cut skin. Be careful not to slide skin along any interior metal edge of the computer.
  Attenzione:
This product contains components that can be damaged by electrostatic discharge (ESD). To reduce the chance of ESD damage, work over a non-carpeted floor, use a static dissipative work surface (such as a conductive foam pad), and wear an ESD wrist strap connected to a grounded surface.

Video overview

View the following video before using the steps in this article.

Removing the battery

  Avvertenza:
Make sure the computer is disconnected from power before starting.
Follow the steps in this section to remove the battery.
Step 1
On the bottom of the notebook, slide the battery release latch into the release position to partially eject the battery.
The release latch is identified by a battery icon.
Sliding the release latch
Step 2
Lift the front end of the battery and remove from the computer.
Removing the battery

Replacing the battery

Use the steps in this section to replace the battery.
Step 1
Toe the bottom outer edge of the battery into the battery bay.
Aligning the battery
Step 2
Press down on the inner edge of the battery until it clicks into place.
Pressing down on the battery

hp-feedback-input-portlet

Azioni
Caricamento...

hp-feedback-banner-portlet

Azioni
Caricamento...

hp-country-locator-portlet

Azioni
Caricamento...
Paese/area geografica: Flag Italia

hp-detect-load-my-device-portlet

Azioni
Caricamento...