This document is for the HP Officejet 100 Mobile Printer.
note:Do not use torn or wrinkled paper, paper on a roll, or paper that is clipped or stapled.
note:Select Manage Custom Sizes to set custom paper dimensions and margins.
note:Do not turn the printer upside down when removing the ink service module as this might cause wet ink to flow out of the module. To avoid ink stains on hands or furniture, wear plastic gloves when removing the ink service module.
caution:Do not reset the printer if you did not replace the ink service module. The ink service module might overflow.
note:Do not put your hands inside the input tray. Use tweezers to remove paper that is hard to reach. Be careful not to scratch the inside of the printer.
note:Use a flashlight to thoroughly check the rollers and wheels for torn pieces of paper that might remain inside the output slot. If any torn pieces of paper remain inside the printer, more jams are likely to occur.
warning:You must unplug the power cord to manually move the carriage and reset the paper feed mechanism without risk of electrical shock.
note:Use a flashlight to thoroughly check the rollers and wheels for torn pieces of paper that might remain inside the printer. If any torn pieces of paper remain inside the printer, more jams are likely to occur.
warning:You must unplug the power cord to manually move the carriage and reset the paper feed mechanism without risk of electrical shock.
note:Use a flashlight to thoroughly check for torn pieces of paper and objects around the carriage. If any torn pieces of paper remain inside the printer, more jams are likely to occur.
note:The color of the Battery Status light indicates the charge level. When the battery is fully charged, the Battery Charging light turns off.
note:Do not put your hands inside the input tray. Use tweezers to remove paper that is hard to reach. Be careful not to scratch the inside of the printer.
note:Use a flashlight to thoroughly check the rollers and wheels for torn pieces of paper that might remain inside the output slot. If any torn pieces of paper remain inside the printer, more jams are likely to occur.
warning:You must unplug the power cord to manually move the carriage and reset the paper feed mechanism without risk of electrical shock.
note:Use a flashlight to thoroughly check the rollers and wheels for torn pieces of paper that might remain inside the printer. If any torn pieces of paper remain inside the printer, more jams are likely to occur.
warning:You must unplug the power cord to manually move the carriage and reset the paper feed mechanism without risk of electrical shock.
note:Use a flashlight to thoroughly check for torn pieces of paper and objects around the carriage. If any torn pieces of paper remain inside the printer, more jams are likely to occur.
note:Do not turn the printer upside down when removing the ink service module as this might cause wet ink to flow out of the module. To avoid ink stains on hands or furniture, wear plastic gloves when removing the ink service module.
caution:Do not reset the printer if you did not replace the ink service module. The ink service module might overflow.
note:Printing in Reserve Mode might affect the color results and the print speed.
note:Wait until the printer is idle and silent before trying to print again.
note:Do not turn the printer upside down when removing the ink service module as this might cause wet ink to flow out of the module. To avoid ink stains on hands or furniture, wear plastic gloves when removing the ink service module.
caution:Do not reset the printer if you did not replace the ink service module. The ink service module might overflow.
note:Printing in Reserve Mode might affect the color results and the print speed.
note:Wait until the printer is idle and silent before trying to print again.
note:If the Left Cartridge light blinks, there is an issue with the tri-color cartridge. If the Right Cartridge light blinks, there is an issue with the black or photo cartridge. See messages displayed on the computer for further instructions.
note:Ifa borderless document or image can be printed on the selected size, the Borderless checkbox is selected.
note:If the paper size and paper type settings are not compatible for borderless printing, a message displays to change the paper settings.
note:Place the tri-color cartridge in the left slot, and the black or photo cartridge in the right slot
note:Make sure to load unused, plain, white paper into the paper tray before you align the ink cartridges. An alignment page prints during the alignment process.
caution:Only install cartridges after the carriage stops moving.
caution:Do not touch the copper contacts on the back of the cartridge or the ink nozzles on the bottom of the cartridge. Touching the contacts or the nozzles might damage the cartridge.
note:Place the tri-color cartridge in the left slot, and the black or photo cartridge in the right slot
note:If the Left Cartridge light blinks, there is an issue with the tri-color cartridge. If the Right Cartridge light blinks, there is an issue with the black or photo cartridge.
caution:Do not touch the copper contacts on the back of the cartridge or the ink nozzles on the bottom of the cartridge. Touching the contacts or the nozzles might damage the cartridge.
note:Place the tri-color cartridge in the left slot, and the black or photo cartridge in the right slot.
note:Make sure to load unused, plain, white paper into the paper tray before you align the ink cartridges. An alignment page prints during the alignment process.
note:You can continue to print when the Left or the Right Cartridge light is on. You do not need to replace the cartridges until print quality is unsatisfactory.
caution:Do not touch the copper contacts on the back of the cartridge or the ink nozzles on the bottom of the cartridge. Touching the contacts or the nozzles might damage the cartridge.
note:Place the tri-color cartridge in the left slot, and the black or photo cartridge in the right slot.
note:Make sure to load unused, plain, white paper into the paper tray before you align the ink cartridges. An alignment page prints during the alignment process.
caution:Only install cartridges after the carriage stops moving.
caution:Do not touch the copper contacts on the back of the cartridge or the ink nozzles on the bottom of the cartridge. Touching the contacts or the nozzles might damage the cartridge.
note:Place the tri-color cartridge in the left slot, and the black or photo cartridge in the right slot
caution:Do not touch the copper contacts on the back of the cartridge or the ink nozzles on the bottom of the cartridge. Touching the contacts or the nozzles might damage the cartridge.
note:Place the tri-color cartridge in the left slot, and the black or photo cartridge in the right slot.
note:Make sure to load unused, plain, white paper into the paper tray before you align the ink cartridges. An alignment page prints during the alignment process.