hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Learn how to upgrade to Windows 11

    Windows 11 Upgrade Guide

  • Feedback

hp-concentra-wrapper-portlet

Actions
Loading...

HP Officejet 7610 Wide Format e-All-in-One Series (H912) - Printing on 11 x 17 or 13 x 19 Paper

Introduction

Your printer can print documents as large as 11 x 17 inch (279 x 432 mm) or 13 x 19 inch (330 x 483 mm). Use these steps to load large sized paper, and then change the printer driver settings in the software program you want to print from.

Printing on 11 x 17 or 13 x 19 inch paper

Follow these steps to print on Tabloid 11 x 17 inch (279 x 432 mm) or Super B 13 x 19 inch (330 x 483 mm) size paper.
note:
You can find the paper type and size on the paper packaging. Knowing the correct paper size helps you select the best printer driver settings.

Step one: Load your paper in the printer

Follow these steps to load paper in the input tray.
  1. Raise the output tray, and then pull out the input tray extender as far as possible.
    Figure : Raise the output tray and then pull out the input tray extender
    Image: Raise the ouput tray
  2. Remove any paper that is currently loaded in the input tray.
  3. Slide out the paper width guides as far as possible.
  4. Insert a stack of clean, unused paper into the input tray with the short edge forward and the print side down.
      caution:
    Do not load paper while the printer is printing. Jams or paper feed issues might occur.
  5. Position the stack of paper in the center of the input tray, and then slide the stack forward until it stops.
  6. Adjust the paper width guides so that they rest against the stack of paper. Do not push the guides in so tightly that they bind against the paper.
      Figure : Load the paper and then adjust the paper width guides
      Image: Load large paper
    1. Load the paper
    2. Adjust the paper guides
  7. Lower the output tray, pull out the output tray extender as far as possible, and then flip up the paper catch.
      Figure : Pull out the output tray extender and flip up the paper catch
      Image: Pull out the output tray extender
    1. Pull out the output tray extender as far as possible
    2. Flip up the paper catch

Step two: Adjust the printer driver settings

Follow these steps to adjust your printer driver settings in Windows or Mac OS X.

Step three: Begin the print job

After changing your print settings, click Print to print.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag India

hp-detect-load-my-device-portlet

Actions
Loading...