This document describes how to set up the product hardware and install the software. It does not include information on how to use the product.
- Support Home
- Software and Drivers
- Contact Us
- Business Support
- My HP Account
caution:Do not connect the USB cable until these steps prompt you to do so.
note:The optional duplexer only ships with some models. If you do not have the optional duplexer, skip to the next step.
note:Look for the engraved arrow on the duplexer for help positioning it.
caution:Do not connect the USB cable at this stage.
note:Make sure stack of paper does not exceed the line marking in the tray.
caution:Do not touch the copper-colored contacts. Do not let the contacts touch any surface and be careful not to scratch the contacts while inserting the ink cartridges.
note:Mechanical noises during alignment are normal.
caution:Do not connect the USB cable until prompted to do so during software installation. HP recommends using a USB cable that is less than 3 m (10 feet) long.
note:If you get any firewall messages during installation, click unblock or accept, or the installation fails.
note:If the User Account Control screen opens, click Allow to continue.
note:If you prefer a basic install, click the basic version instead of the full feature version.
note:Click the View directions () link for step-by-step instructions on downloading and installing the software.