hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Coronavirus (COVID-19) Impact

    We are experiencing longer than expected wait times to reach an agent. Please use the resources here on our HP Support website to answer your questions and troubleshoot any issues you may be experiencing.  Try our Virtual Agent and Diagnostic Tools for faster service.

    Information
    Microsoft Support for Windows 7 ended on Jan 14, 2020

    - HP recommends that you begin the process of upgrading to Windows 10 if your computer has been tested by HP. For more information, click here.


    - If your computer is not compatible for upgrade to Windows 10, we can help to find the perfect computer for you. Check our Weekly deals!

hp-concentra-wrapper-portlet

Actions
Loading...

HP Officejet 6000 (E609a) and 6000 Wireless (E609n) Printers - Cleaning the Printhead

Introduction

This document contains steps for cleaning the printhead with a printhead-cleaning tool. This process runs ink through the nozzles to try to unclog and clean the printhead inside the product.
You can use the cleaning process to resolve print-quality issues, such as streaks or smears in the printout.
note:
Because this process uses ink, HP recommends that you do not clean the printhead unnecessarily to avoid wasting ink.

Cleaning the printhead

Use one of the following methods to run the printhead-cleaning tool.
note:
The cleaning process might take several minutes to complete.

Method one: Clean the printhead from the control panel

Follow these steps to run the printhead-cleaning tool from the product control panel.
  1. Load letter, A4, or legal size, unused, plain white paper into the main input tray.
  2. Press and hold the Power button ().
  3. Press the Cancel button () two times, and then press the Resume button () one time.
  4. Release the Power button ().

Method two: Clean the printhead using HP Solution Center

Follow these steps to run the printhead-cleaning tool from HP Solution Center, which is a component of the software that shipped with your product.
  1. Open HP Solution Center:
    • Windows XP: Click Start, click All Programs, click HP, and then click HP Solution Center.
    • Windows Vista: Click the Windows icon (), click All Programs, click HP, and then click HP Solution Center.
    HP Solution Center opens in a new window.
  2. Click Settings (), and then click Printer Toolbox. The printer Toolbox opens.
  3. Click the Device Services tab, and then click Clean Printheads.
  4. Click Clean to begin the cleaning process, and then follow the on-screen instructions to complete the process. A test page prints after the cleaning process completes.
    Figure : Example test page
  5. Recycle or discard the test page.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag India

hp-detect-load-my-device-portlet

Actions
Loading...