HP Officejet 4630, Deskjet 4640 Printers - First Time Printer Setup

הערה:

If you are looking for the printer software, go to:

• Printer software for HP Officejet 4630 printers: http://123.hp.com/OJ4630
• Printer software for HP Deskjet Ink Advantage 4640 printers: http://123.hp.com/DJ4640

1. Remove the printer from the box.
2. Remove all tape and packing materials from the front and rear of the printer.
3. Raise the scanner lid, and then remove the packing tape.
   איור : Removing the packing tape from under the scanner lid

   
4. Lower the scanner lid.
5. Gently grasp the handles on either side of the printer, raise the ink cartridge access door until it locks into place, and then remove all tape and packing material from inside the printer.
   איור : Removing the tape and packing materials from inside the printer
   
   1. Open the ink cartridge access door
   2. Remove the tape and packing material from the cleanout area
   3. Remove the tape and packing material from the ink cartridge access area
6. Close the ink cartridge access door.
   איור : Closing the ink cartridge access door

   
7. Open the paper tray door, pull it toward you to extend the paper tray, and then remove the packing tape.
   איור : Removing the packing tape from the paper tray

   
8. Push the paper tray forward until it clicks into place, and then close the paper tray door.
9. Recycle the packing materials.
   איור : Recycling the packing materials

   

הערה:

Do not connect a USB cable at this time. The connection to the computer is established during software installation.

1. Connect the power cord to the rear of the printer, and then plug it into a wall outlet.
   איור : Connecting the power cord

   
2. Turn on the printer.
   איור : Turning on the printer

   
3. On the printer control panel, press the down arrow to select the language, and then press OK.
   איור : Selecting your language and country/region

   
4. Press the down arrow to select Yes, and then press OK.
   The Set Country/Region menu opens.
5. Press the down arrow to select the country/region, and then press OK.
6. Press the down arrow to select Yes, and then press OK.

1. Open the input tray door, and then pull it toward you to extend the input tray.
2. Gently pull out the input tray extender, and then lift the paper catch.
   
3. Slide the paper width guides to their outermost position.
   
4. Load a stack of U.S. letter, or A4 size paper into the paper tray with the short edge forward and the print side down.
   
5. Push the stack into the tray until it stops.
6. Slide in the paper width guides until they rest against the edges of the paper.
   
7. Push the input tray forward until it clicks into place.

   הערה:

   Push the input tray forward all the way to avoid an error message.

   

1. Grasp the handles on either side of the ink cartridge access door, and then raise the ink cartridge access door until it locks into place.
   איור : Opening the ink cartridge access door

   
2. Wait until the carriage is idle and silent before you proceed.
3. Remove one of the ink cartridges from its package. Be careful to only touch the black plastic on the ink cartridge.
   איור : Removing the ink cartridge from its package

   
4. Remove the plastic tape from the ink cartridge.

     שים לב:

   Do not touch the copper-colored contacts or the ink nozzles. Do not replace the protective tape on the contacts. Handling these parts can result in clogs, ink failure, and bad electrical connections.

   איור : Removing the plastic tape

   
5. Lift up the lid on the ink cartridge slot.
   איור : Lifting up the lid on the ink cartridge slot

   
6. Hold the ink cartridge by its sides with the nozzles toward the printer, then press the ink cartridge forward into the slot until it snaps into place.
   איור : Inserting the ink cartridge

   
7. Close the lid on the ink cartridge slot to secure the ink cartridge into place.
   איור : Closing the lid on the ink cartridge slot

   
8. Repeat the previous steps to install the other ink cartridge.
   איור : Inserting the ink cartridges
   
   1. Insert the ink cartridge
   2. Close the lid
   3. The color ink cartridge is on the left, and the black ink cartridge is on the right
9. Close the ink cartridge access door.
10. Follow the instructions on the control panel to start the ink cartridge alignment.
    The printer aligns the ink cartridges and prints an alignment page.
    • Alignment page did not print?
      If the printer did not automatically print an alignment page, you can align the ink cartridges from the printer control panel:

      1. On the printer control panel, press the down arrow to scroll to Tools, and then press OK.
      2. Press the down arrow to scroll to Align Printer, and then press OK.
         The printer prints an alignment page.

• Printer software for HP Officejet 4630 printers: http://123.hp.com/OJ4630
• Printer software for HP Deskjet Ink Advantage 4640 printers: http://123.hp.com/DJ4640