Error:

Javascript הושבת בדפדפן שלכם. דף זה דורש Javascript. שנו את הגדרות הדפדפן כדי לאפשר ביצוע של קוד Javascript.‏ עיינו בתיעוד הדפדפן כדי לראות הוראות מפורטות.

hp-support-head-portlet

פעולות

טעינה...‏

תמיכת הלקוחות של HP - מאגר ידע

hp-contact-secondary-navigation-portlet

פעולות

טעינה...‏

hp-share-print-widget-portlet

פעולות

טעינה...‏

מידע

למד כיצד לשדרג ל- Windows 11
ניתן למצוא שאלות נפוצות ותשובות כאן

משוב

hp-concentra-wrapper-portlet

פעולות

טעינה...‏

HP LaserJet Pro Printers - Setting Up Printer Hardware

This document is for the LaserJet Pro P1102, P1102s, P1102w, P1106, P1108, P1109, and P1109w printers.

Introduction

This document explains how to set up the physical parts of the product. Complete these steps before you install the product software on your computer.

This document includes the following steps to set up the printer:

Check the contents of the box
Remove packing tape
Prepare the print cartridge
Load plain paper
Turn on power

Setting up the printer

Follow these steps in order.

Step 1: Check the contents of the box

Remove the printer from the box, and then check the contents of the box.

The contents might vary by country/region. See the packaging for a list of items shipped in the box.

Step 2: Remove packing tape

Remove all packing tape from the printer.

Step 3: Prepare the print cartridge

Open the print cartridge door.

איור : Open the print cartridge door
Remove the print cartridge packaging.

איור : Remove the print cartridge packaging
Remove the print cartridge from the printer.

איור : Remove the print cartridge

שים לב:
To prevent damage to the print cartridge, hold the print cartridge at each end.
Remove the packaging from inside the printer.

איור : Remove the packaging from inside the printer.
Remove the orange clip from the end of the print cartridge.

איור : Remove the orange clip from the print cartridge
Gently rock the print cartridge back and forth to distribute the toner evenly.

איור : Rock the print cartridge
Bend the tab on the left side of the print cartridge until the tab breaks loose, and then pull the tab to remove all the sealing tape from the print cartridge.

איור : Remove the sealing tape

שים לב:
If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric.
Insert the print cartridge, and then close the print cartridge door.

איור : Insert the print cartridge and close the door

Step 4: Load plain paper

To load plain paper in the main input tray, follow these steps.

Slide the paper length and width guides to their outermost positions.

איור : Slide out paper guides
Load plain paper in the main input tray with the top forward and the print side up.

איור : Load paper
Slide the paper guides inward so that they rest against the stack of paper.

הערה:
To prevent jams and skewing, always adjust the side and front paper guides.

איור : Adjust the paper guides

Step 5: Turn on power

Connect the power cord to the back of the printer.

איור : Connect the power cord
Plug the power cord into an electrical outlet.
Press the Power button to turn on the printer.

איור : Turn on the power

הערה:
A blank page might print when you turn on the printer for the first time.

Getting started with ePrint

Now you can stay connected and productive on the go with ePrint. ePrint lets you print directly to your ePrint-enabled HP printer using a smartphone, notebook, or other mobile device. For additional information related to setting up and using ePrint, click the link provided.