Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Feedback

hp-concentra-wrapper-portlet

Actions

HP Consumer All-in-One Desktop PCs - Enabling and disabling wireless charging (select models only)

By default, the wireless charging feature is disabled in some power states on select models. On other models, wireless charging is enabled in all power states by default. To enable or disable the wireless charging feature, see the procedure for your computer model.

Enable wireless charging for HP ENVY Curved All-in-One 34-b000 and HP ENVY Curved All-in-One 34-b100 computers

By default, the wireless charging feature is disabled in the S4 (Hibernate) and S5 (shutdown) power states.

Turn off the computer.
Turn on the computer and immediately press the f10 key.
Continue pressing the f10 key until the BIOS Configuration screen is displayed.
Use the arrow keys on your keyboard to navigate to the Power tab, and then select Hardware Power Management.
Set Wireless Charging in S4/S5 to Enable.
Press the f10 key to save the changes and exit.

Enable wireless charging for HP ENVY 32 All-in-One 32-a000 and HP ENVY 32 All-in-One 32-a100 computers

If Power Saving Mode is enabled, wireless charging is disabled in the S5 (shutdown) power state. To enable wireless charging in Power Saving Mode, use the following procedure.

Press the OSD button found on the bottom edge of the monitor.
After the main menu is displayed, press the OSD button again to open the HP ENVY OSD menu.
Select Power.
Under Power Mode, select Full-Feature.
Under Wireless Charging, select On to enable wireless charging.