hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Learn how to upgrade to Windows 11

    Windows 11 Upgrade Guide

  • Feedback

hp-concentra-wrapper-portlet

Actions
Loading...

HP LaserJet Enterprise, HP PageWide Enterprise - Install third-party solutions using the Solution Installer

Use the EWS to install third-party software packages that extend or modify the functionality of the printer.

Introduction

The EWS solution installer page can be used to install example applications that come as part of the software development kit (SDK).

If the solution partner develops applications similar to those provided in the SDK—for example, a custom menu (create a custom menu under administrator menu), a custom internal page (that displays on the EWS), a custom pdl (page description language) using OPI interface, a custom authentication agent—they can be installed by making use of the Solution Installer page on EWS.

Many current third party solutions use OXP 1.5 interface apis in the solution to install the bundle. For example, when Safecom or HPAC (versions before 15.0) secure pull-print applications are configured, they install the solution bundles containing the custom authentication agent by using OXP 1.5 "Install" api automatically without requiring the user to go to EWS to install.

Before you begin

Before installing a solution, verify that there is a non-blank administrator password set on the General Security page under the Security tab.

For solutions that require a restart of the printer to complete the installation, click the Restart Now button to restart the printer immediately, or click the Restart Later button to delay the restart.

Before reinstalling a solution, look for the solution in the Installed Solutions area, and then remove the solution. If an existing solution is installed again, a message displays warning that the installation is about to overwrite the existing solution. In this message, click OK to continue, or click Cancel to stop the installation.

After-market solutions require a digital signature to ensure that they come from a trusted source and have not been modified.

Firmware upgrades cannot be performed using the Solution Installer page. Install firmware upgrades on the Firmware Upgrade page.

Step one: Install a solution

Use the following steps to install a new solution.

  1. Using the top navigation tabs, click General.

  2. In the left navigation pane, click Solution Installer.

  3. Click the Browse... button in the Install New Solution area to locate and open the installation file from the network.

  4. Click the Install button. Installed solutions display in the Installed Solutions area.

Step two: Remove a solution

Use the following procedure to remove an installed solution.

  1. Select a solution in the Installed Solutions area.

  2. Click the Remove... button.

  3. Restart the printer to complete the removal of the solution.


hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Ireland

hp-detect-load-my-device-portlet

Actions
Loading...