hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Need Windows 11 help?

    Check the information on compatibility, upgrade, and available fixes from HP and Microsoft. Windows 11 Support Center

    Information
    Win10 - USB Printing broke post Windows update

    USB connected printers don't print / not recognized. Fix Win10 USB Print issue

  • Feedback

hp-concentra-wrapper-portlet

Actions
Loading...

HP Smart Tank Printers - Refill the ink tanks

Refill ink in one or more ink tanks of your HP Smart Tank 670, 720, 750, 790, 6000, 7000, 7300, or 7600 series printer when the ink level is low.

Fill the ink tanks

Fill empty or low ink tanks using official bottles of HP ink.

Be aware of the following when working with ink bottles:

  • Keep the ink bottles beyond the reach of children.

  • Open the ink bottle only when you are filling the ink tanks.

  • Store the ink bottles upright in a cool, dry place.

CAUTION:

To avoid possible printhead damage, do not install the printheads until you have filled the ink tanks.

  1. From the left side of the printer, lift the ink access door.

    Lifting the ink access door
  2. Open the tank covers.

    Opening the tank covers
  3. Open the cap on the ink tank you want to fill.

    Opening the ink tank cap
  4. Open the ink bottle.

    • If your ink bottles have twist-off caps, twist to remove the cap, and then set it aside.

      Opening an ink bottle with twist-off cap
    • If your ink bottles have a flip-top cap, twist the cap to remove it. Pull the seal tab to remove it, and then dispose of the seal. Replace and tighten the cap on the bottle, and then flip open the cap.

      Opening an ink bottle with flip cap
  5. Match the color of the ink bottle with the color of the ink tank. Hold the bottle on the tank nozzle, making sure the tip of the bottle fits properly over the nozzle, and let the ink drain into the tank until the tank is full.

    If the bottle does not start draining, remove it, and then reinsert it onto the tank. Do not squeeze the bottle.

    Filling ink into the tanks
  6. After the ink tank is filled, set the bottle upright, and then close or replace the ink bottle cap.

  7. Close the ink tank cap.

    Closing the ink tank cap
  8. Repeat the previous steps to fill other ink tanks.

  9. Close the tank covers and ink access door, and then wait for 30 seconds.

    The printer completes ink purging and calibration.

    Closing the tank covers and then ink access door
  10. Store bottles with leftover ink upright in a cool, dry place.

Frequently asked questions (FAQs)

Still have a question? Find additional answers and help.


hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Ireland

hp-detect-load-my-device-portlet

Actions
Loading...