hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Audio or sound issues? Try our automated HP Audio check!

    Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

    Information
    Create an HP account today!

     Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more​

hp-concentra-wrapper-portlet

Actions
Loading...

OMEN by HP 15 ce000, dc0000 PCs - Replace the battery

If the battery crashes, is damaged, or needs upgrading, you can replace the battery.

CAUTION:

This product contains components that can be damaged by electrostatic discharge (ESD). HP recommends using an anti-static wrist strap and working over a non-carpeted floor with a conductive foam pad to reduce the to reduce the chance of electrostatic discharge (ESD) damage.

Servicing internal components increases the risk of damaging the computer which might not be covered under warranty. Understand the risk and refer to the product's warranty before you attempt to service the computer.

Prepare for replacing parts of the computer

Prepare for replacing a part of the computer by making sure your computer, components, and workspace are ready.

  1. Turn off the computer, and then wait for components to cool.

  2. Disconnect the power cord and any cables from the computer, and then unplug the power cord from the wall outlet, surge protector, extension cable, or power strip.

  3. Transfer the computer to a clear, flat, stable work surface over a non-carpeted floor with a conductive foam pad to reduce the chance of electrostatic discharge (ESD) damage. HP recommends using anti-static wrist straps.

  4. Keep and parts or components in their protective packaging until you are ready to install them.

  5. Make sure you have a Phillips or Flathead screwdriver, depending on your computer model.

Remove the battery

Remove the battery from inside the computer.

  1. Remove the top cover.

    Removing the top cover
  2. Use a Phillips-head screwdriver to remove the four 5mm (0.19 in) screws that secure the battery in place.

    Warning:

    To avoid personal injury and damage to the computer, use extreme care not to puncture, twist, or crack the battery. An internal puncture or rupture to the battery can cause an electrical short, which might result in a thermal event.

    Locating the screws to remove them
  3. With both hands, carefully lift the rear edge of the battery, and then slide the front edge away from the base enclosure to remove the battery.

    Removing the battery

Replace the battery

Replace the battery, and then secure it in place inside the computer.

  1. Using both hands, slide the front edge of the battery into the cut-outs, and then lower the rear edge onto its connector on the system board.

    Replacing the battery
  2. Use a Phillips-head screwdriver to replace the four 5mm (0.19 in) screws that secure the battery in place.

    Locating the screws to remove them
  3. Replace the top cover.

    Replacing the top cover

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Ireland

hp-detect-load-my-device-portlet

Actions
Loading...