Replace HP inkjet printer cartridges

Replace cartridges for printers that use HP 178, 364, 564, 655, 862, 902, 903, 904, 905, 906, 907, 908, 909, 910, 912, 914, 915, 916, 917, 918, 919, 920, 934, and 935 cartridges.

1. Make sure paper is loaded into the input tray, and then turn on the printer.

2. Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.

3. Push in the tab on a cartridge, and then pull it from the slot.

   

4. Remove the new cartridge from the package, and then pull the orange pull-tab and plastic wrap completely off. The paper label on the top side tears slightly to vent the cartridge.

   CAUTION:

   Completely remove the-tab and plastic wrap before removing the orange cap in the next step. Otherwise, ink might leak.

   

5. Hold the cartridge by its sides, and then twist the orange cap counter-clockwise to remove it.

   CAUTION:

   Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, an ink system failure, and a failed electrical connection.

   

6. Insert the cartridge into its color-coded slot, and then press down on it until it clicks into place.

   

7. If the cartridge does not firmly seat, take it out of the slot, gently bend the tab away from the cartridge no more than 1.27 cm (0.5 in), and then reinsert it.

   CAUTION:

   Bending the tab too far might damage the cartridge or cause the tab to break off.

   

8. Close the door or lid to the cartridge access area, and then follow any instructions to align the printer if prompted.

Replace cartridges for printers that use 932, 933, 950, 951, 952, 953, 954, 955, 956, 957, 958, 959, 962, 963, 964, 965, 966, 967, 968, and 969 cartridges.

1. Make sure paper is loaded into the input tray, and then turn on the printer.

2. Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.

3. Push in on the front of a cartridge to release it from the carriage.

   CAUTION:

   Do not lift the latch handle on the side of the carriage. This can unseat the printhead and cause print mechanism damage and printing problems.

   

4. Remove the new cartridge from the package.

5. Insert the cartridge into its color-coded slot until it clicks into place.

6. Close the door or lid to the cartridge access area, and then follow any instructions to align the printer if prompted.

Replace cartridges for printers that use 21, 22, 27, 28, 56-67, 61/301, 63/302, 64/303, 65/304, 74, 75, 92-98, 123-125, 302-305, 652, 653, 667, 680, 682, 803-805, and 901 cartridges.

1. Make sure paper is loaded into the input tray, and then turn on the printer.

2. Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.

3. Remove a cartridge from the carriage.

   • Carriages with cartridge latches: Open the latch, and then pull the cartridge up and out of the slot.

     

   • Carriages without cartridge latches: Gently press down on the cartridge to release it, and then pull it out of the slot.

     

4. Remove the new cartridge from the package. Be careful to hold it by the black plastic sides.

5. Remove the tape from the cartridge.

   CAUTION:

   Do not attempt to replace the protective tape or touch the copper-colored contacts or the ink nozzles. Touching these parts can result in an ink system failure.

   

6. Insert the cartridge into its color-coded slot, making sure it is securely seated in the carriage. Close the latch if present.

7. Close the door or lid to the cartridge access area, and then follow any instructions to align the printer if prompted.