hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Compaq 6000 Pro All-in-One PC - Webcam Module

Webcam Module

Description
Spare part number
Webcam module
625254-001
The webcam module is located at the top of the computer. It is secured with two screws and has one connector.
Figure :
To remove the webcam module:
  1. Prepare the computer for disassembly (see Preparing to Disassemble the ComputerPreparing to Disassemble the Computer).
  2. Remove the small rear cover (see Small Rear CoverSmall Rear Cover).
  3. Remove the port cover (see Port CoverPort Cover).
  4. Remove the stand (see StandStand).
  5. Remove the drive cover (see Optical DriveOptical Drive).
  6. Remove the memory cover (see MemoryMemory).
  7. Remove the rear panel (see Upper Rear PanelUpper Rear Panel).
  8. Remove the two screws that secure the webcam module to the computer.
    note:
    Make note of grounding wire placement for proper installation later.
    Figure :
  9. Lift the webcam module as much as the cable allows, and then disconnect the cable from the module.
To install a webcam module, reverse the removal procedures.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Ireland

hp-detect-load-my-device-portlet

Actions
Loading...