hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Learn how to upgrade to Windows 11

    Windows 11 Upgrade Guide

    Information
    Need help with HP Instant Ink?

    Find solutions and helpful tips on our Instant Ink Support page. Get Instant Ink Support

  • Feedback

hp-concentra-wrapper-portlet

Actions
Loading...

HP Designjet 100, 100plus, 120 and 130 Series Printers - Page Size and Margin Information

Page size and margin information

When entering Width and Length values for a custom paper size, take into account the following limits:
  • The minimum acceptable width for the 100/100plus series is 76 mm (3 inches).
  • The minimum acceptable length for the 100/100plus series is 142 mm (5.6 inches)
  • The maximum acceptable width for the 120/130 series is 625 mm (24.6 inches)
  • The maximum acceptable length for the 120/130 series is 1625 mm (63.98 inches) for sheet paper, or 15240 mm (600 inches) for roll paper (120nr/130nr ONLY)
note:
The application may restrict the maximum length to less than the above figures.

Margins for 100 series

For portrait paper and a landscape drawing, the minimum margins are:
Printer
Top Margin
Bottom Margin
Right/Left Margin
100/100plus series (cut sheet)
5mm = 0.20 inches
12 mm = 0.47 inches
5mm = 0.20 inches
120/130 series (cut sheet)
5mm = 0.20 inches
12 mm = 0.47 inches
5mm = 0.20 inches
120nr/130nr series (roll)
5mm = 0.20 inches
5 mm = 0.20 inches
5mm = 0.20 inches

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Ireland

hp-detect-load-my-device-portlet

Actions
Loading...