hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Designjet 650C Printer - Product Specifications

Model numbers
Description
Model number
HP Designjet 650C printer
C2858A (D/A1 size)
HP Designjet 650C printer
C2859A (E/A0 size)
HP Designjet 650C printer model B
C2858B (D/A1 size)
HP Designjet 650C printer model B
C2859B (E/A0 size)
HP Designjet 650C/PS printer
C3791A (D/A1 size)
HP Designjet 650C/PS printer
C3792A (E/A0 size)
Serial number location
When looking at the back of the printer, the serial number is located on the right panel directly above the power plug.
Graphic languages
The printer accepts drawing data from CAD and other software programs supporting the following languages:
  • Hewlett-Packard Graphics Language (HP-GL), a vector language
  • HP-GL/2, an enhanced version of HP-GL
  • HP-RTL
  • PJL
  • PostScript (R) (HP Designjet 650/PS, or 650C printers with PostScript installed)
HP Designjet 650C Printer Model A
  • Expandable top and bottom margins from 17 mm to 10 mm
  • 300 x 300 dpi for Final and Draft modes
  • Able to accept ROM SIMMs
  • Sheet and roll media support
  • Automatic cutter when plotting with roll media
  • Hot I/O switching
HP Designjet 650C Printer Model B
  • User selectable and faster drying times
  • Automatic Language Switching
  • New scatter halftone dither
  • PANTONE (R)* Support
  • Novell Certified
Recommended cables
RS-232-C interface
The use of a short cables (each less than 15 meters or 50 feet) is recommended for the RS-232-C interface. A longer cable is permissible, provided the load capacitance does not exceed 2500 picofarads.
Centronics interface
The use of a short cable of 10 feet (3.5 m) or less is recommended for the Centronics interface.
Media specifications
Media sizes
Width (carriage axis)
Length (paper axis)
E/A0-size printer
D/A-1 size printer
Minimum
210 mm (8.3 inches)
210 mm (8.3 inches)
Maximum
917 mm (36.1 inches)
625 mm (24.6 inches)
Minimum
280 mm (11 inches)
280 mm (11 inches)
Maximum
1297 mm (51 inches)
1297 mm (51 inches)
Media types
Monochrome
  • Plain paper bond
  • Plain vellum (HP preferred)
  • Plain translucent paper (HP preferred)
  • Hewlett-Packard polyester Inkjet film
  • HP special Inkjet paper
Color
HP special Inkjet paper
Margins
Leading edge:
Trailing edge:
Sides:
Normal
17 mm (0.67 inches)
17 mm (0.67 inches)
5.0 mm (0.2 inches)
Expanded (roll media only)
10 mm (0.39 inches)
10 mm (0.39 inches)
5.0 mm (0.2 inches)
All measurements +/- 2 mm (0.08 inch)
Resolution
Mono
Color
Final and Draft modes: 300 x 300 dpi
Enhanced mode: 600 x 600 dpi
PostScript mode: 300 x 300
300 x 300 dpi
Accuracy (Maximum accumulated error)
+/-0.38 mm (0.015 inches) or +/-0.2% of the specified vector length, whichever is greater, at 23 degrees C (73 degrees F), 50–60% relative humidity, on HP Matte Film in Mono mode.
Media handling
The printers handle media that does not exceed the following maximum and minimum:
E-size
D-size
Min. width
Sheet
8.3 inches (210 mm)
A/A4-E/A0
8.3 inches (210 mm)
A/A4-D/A1
Roll widths
Max. widths
24 inches AND 36 inches
36.1 inches(917 mm)
24 inches
24.6 (625 mm)
Max. Sheet length
expected to be 1.6 m
Long axis plotting available [maximum length 50 feet (15.2m) and 9 feet with PostScript driver].
The media margins define the real available plotting area on the media
  note:
Long axis plotting may require a special driver or PPD file.
Ink information
Black Inkjet print cartridge
51640A
  • Pigmented ink
    • dark black ink
    • crisp sharp characters
    • fast dry time
    • optimized to prevent black to color bleed
  • Permanence
    • lightfastness
    • water resistance
    • highlighter type smear or blurred text
    • optimized to prevent black to color bleed
Color Inkjet print cartridge
51650(C) (M) (Y) Color Cartridges
OR
51640A for black
  • Dye-based.
  • High quality color CAD output on plain bond paper with a lower cost per page.
  • Designed specifically for use with HP special Inkjet paper.
Memory information
The HP Designjet 650C printer has 4 megabytes (MB) of standard on-board RAM. A PostScript ROM SIMM and MIO card are optional. There are two RAM expansion slots which can hold optional 2 MB, 4 MB, 8 MB, 16 MB or 32 MB single in-line memory modules (SIMMs). The maximum expandable RAM is 64 MB additional, or a total of 68 MB. (Before the introduction of the Model B printer and the 16 and 32 MB SIMMs, maximum expandable memory for the Model A printer was 20 MB as specified in the User'sGuide.)
The HP Designjet 650C/PS printer comes pre-installed with 4 MB of standard on board RAM, a PostScript ROM SIMM and Jetdirect MIO card and requires a minimum of 4 MB additional memory or a total of 8 MB.
Performance
"Normal" printer use
"Normal" printer use means less than:
  • 40 pages per day (if medium-density E/A0 CAD plots), or
  • 10 pages per day (if medium-density E/A0 image prints)
The reliability of the HP Designjet 650C printer will be maximized by maintaining an output volume within 40 EA0-size plots per day on average. The HP Designjet 650C printer can support the occasional need for up to 100 plots per day, but the regular use of the HP Designjet 650C printer above an average of 40 plots per day may result in increased maintenance requirements.
Producing more than 40 E/A0-size plots per day and/or changing the most frequently used pen cartridge (generally the black) more than once every 3.5 days, is working the HP Designjet 650C printer at above average conditions which will result in increased maintenance requirements.
A plot counter is contained in the EEROM of the printer, the contents of which can be seen by performing a Configuration Plot from the front panel. For all 'A' models and 'B' models below firmware rev. 5.11 the plot counter only reflects non-PostScript plots. For 'B' models starting with firmware rev. 5.11, both PostScript and non-PostScript files are counted. The value is listed in hexidecimal format on line 0 of the EEROM map at the bottom of the Configuration plot, in columns c, d, and e. The count is displayed in reverse order and must be reversed when determining the number of plots.
To print the configuration plot
  1. Make sure media is loaded.
  2. In the Full Menu mode, choose Utilities.
  3. Choose Config Plot option and press ENTER.
Physical specifications
Weight
Length
Width
Height
D-size
07.6 kg (128 lb)
1079 mm (54.0 inches)
711 mm (28.0 inches)
1149 mm (45.25 inches)
E-size
69.75 kg (155 lb)
1371 mm (42.2 inches)
711 mm (28.0 inches)
1200 mm (47.25 inches)
D-size, body only (shipping weight)
50.0 kg (110.2 lb)
E-size, body only (shipping weight)
60.0 kg (132.2 lb)
D-size, legs and bin (shipping weight)
21.0 kg (46.3 lb)
E-size, legs and bin (shipping weight)
26.0 kg (57.3 lb)
Electrical specifications
Source
100–240V AC +/-10%.
Frequency
47 - 63 Hz
Power consumption
140 W (2.0 A max.)
Environmental specifications
Operational
Mechanical and electrical:
0 to 55 degrees C (32 to 131 degrees F)
@ 20-80% relative humidity
With cartridges and media:
15 to 35 degrees C (59 to 95 degrees F)
@ 20–80% relative humidity
For optimal print quality and media handling:
15 to 30 degrees C (59 to 86 degrees F)
@ 20–80% relative humidity
Storage
Printer and media
–40 to 70 degrees C (–40 to 158 degrees F)
@ 5-95% relative humidity
Cartridges - black
Cartridges - color
–40 to 60 degrees C (–40 to 104 degrees F)
–40 to 70 degrees C (–40 to 158 degrees F)
Processor
Intel 80960, 32-bit RISC
Warranty
One-Year On-Site, Next Day Hardware Warranty
Except when purchased as part of a system, Hewlett-Packard warrants your graphics peripheral hardware product against defects in materials and workmanship for a period of one year from receipt by the end user (proof of purchase required). If HP receives notice of such defects during the warranty period, HP will either, at its option, repair or replace products which prove to be defective.
Should HP be unable to repair or replace the product within a reasonable amount of time, customer's alternative exclusive remedy shall be refund of the purchase price upon return of the product.
If this product was purchased as part of an HP system in a coordinated shipment or as a system add-on, it is warranted against defects in material and workmanship during the same period as the HP system.
Safety certifications
  • CSA 22.2 No. 950 certified
  • UL 1950 listed
  • NEMKO TSE (74)DK203/92 approved
  • NOM certified
  • EN 60950 compliant

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag Ireland

hp-detect-load-my-device-portlet

Actions
Loading...