hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Audio or sound issues? Try our automated HP Audio check!

    Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

    Information
    Create an HP account today!

     Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more​

hp-concentra-wrapper-portlet

Actions
Loading...

Automatic document feeder does not pick paper or feeds too many sheets

When scanning or copying, the automatic document feeder (ADF) picks too many sheets of paper or does not feed in the original. A 'Load original' or 'Document feeder mispick' error might display.

Clean the ADF rollers and the separator pad

Dust inside the automatic document feeder (ADF) can result in paper feed issues.

  1. Get a lint-free cloth and distilled water.

  2. Remove the original document from the ADF.

  3. Turn off the printer.

  4. Disconnect the power cord from the rear of the printer.

  5. Open the ADF cover.

    Lifting the ADF cover
  6. Find the paper pick rollers and the separator pad inside the ADF.

    ADF paper pick rollers and separator pad

    Callout

    Description

    1.

    Paper pick roller

    2.

    Separator pad

  7. Lightly dampen a clean, lint-free cloth with filtered or distilled water, and then squeeze any excess liquid from the cloth.

  8. Use the damp cloth to clean the paper pick rollers and the separator pad.

  9. Leave the ADF cover open for two minutes to allow the rollers and pad to dry.

  10. Close the ADF cover.

  11. Reconnect the power cord to the printer, and then turn on the printer.

  12. Slide in the paper width guides until they rest against the sides of the paper.

  13. Try to scan or copy with the ADF.

Reset the printer

Reset the printer to recover from printer errors or failures.

  1. With the printer turned on, disconnect the power cord from the printer.

  2. Unplug the power cord from the power source.

  3. Wait 60 seconds.

  4. Reconnect the power cord to a wall outlet and to the printer.

    Note:

    HP recommends plugging the printer directly into a wall outlet.

  5. Turn on the printer to complete the reset.

Service the printer

Service or replace your HP product if the issue persists after completing all the preceding steps.

Go to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will be directed to a local service center in your area.

To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.


hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Indonesia

hp-detect-load-my-device-portlet

Actions
Loading...