HP Desktop PCs - motherboard specifications, Iris-A8
Figure : The Iris-A8 motherboard
Motherboard description
HP name: Iris-A8
SSID: 81B3
Form Factor
Mini ITX
Dimensions: 17.0x17.0 cm (6.7x6.7 in)
Chipset
The chipset on this motherboard is combined with the processor into a single integrated circuit called System on a Chip (SoC). This technology combines the processor and chipset functionality into a single physical package.
Processor upgrade information
Supports the AMD A8-7410 (Carrizo-L) Quad Core processor only. The processor is not upgradeable.
Memory upgrade information
Single channel (2 DIMMs per channel) memory architecture
Two DDR3L UDIMM (240-pin) sockets
Supports up to PC3L-12800 (DDR3L-1600)
Supports 2 GB, 4 GB, and 8 GB UDIMMs
Supports up to 4 GB on 32-bit systems
note:
32-bit systems cannot address a full 4.0 GB of memory.
Supports up to 16 GB (unbuffered) on 64-bit computers
note:
Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.
Video
Integrated graphics
Integrated AMD Radeon R5 Graphics
note:
Integrated graphics does not work if a graphics card is installed.
Audio
Integrated audio
Audio Codec: ALC3863-CG
High Definition (Azalia) 5.1 channel audio support
note:
The motherboard supports 5.1 surround sound. If the computer does not have the required audio jacks for a 5.1 configuration, additional hardware is required to use 5.1 surround sound.
Audio jack presence detection
note:
An internal speaker is not included with integrated audio. External speakers or headphones are required to hear sound.
note:
Integrated audio does not work if a sound card is installed.
Network
LAN: 1000BASE-T
Technology: Realtek RTL8161
Data transfer speeds: up to 10/100/1000 Mb/s
Transmission standards: 1000BASE-T Ethernet
Expansion Slots
One M.2 socket 1, key A
I/O Ports and Jumpers
Back I/O ports
Figure : Iris-A8 back I/O panel
DC power input
VGA
HDMI
USB 3.0: 2
USB 2.0: 2
Ethernet (LAN)
Audio: Line in
Audio: Line out
Audio: Microphone
Clear CMOS and clear password
Figure : Pins and jumpers
Clear CMOS: On the set of pins to the left (labeled 1-3), move the jumper to pins 2 and 3 and start the computer.
Clear password: On the set of pins to the right (labeled 1-6), remove the jumper from pins 5 and 6 and start the computer.
Some features of the tool may not be available at this time. We apologize for this inconvenience and are addressing the issue.Minimize Chat bot windowLoading ChatbotNew Message