solution Contentsolution Content

HP AMP 100 Printers - Blinking Lights

This document is for HP AMP 100, 120, 125, and 130 printers.
The following sections describe the most common error conditions with combinations of blinking (flashing) lights displayed on the control panel, followed by solutions for each combination. Find the blinking lights pattern you are experiencing, and then follow the steps to resolve the issue.
Review the following to reference the printer control panel buttons and lights.
    Figure : Control panel buttons and lights
    Control panel with lights indicated
  1. Power button/light
  2. Cancel button/light
  3. Wireless button/light
  4. Control panel display
  5. Information button/light
  6. Resume button/light
    Figure : Control panel display icons
    Control panel display icons
  1. Wireless, Wireless Attention, and Signal Bars icons
  2. Wi-Fi Direct icon
  3. Number of Copies icon
  4. Paper Error icon
  5. Error icon
  6. Ink Level icons
    Figure : Audio control panel
    Audio control panel
  1. Phone button
  2. Volume down button
  3. Play/Pause button
  4. Volume up button
  5. Bluetooth button/light

Service or replace the printer

Service or replace your HP product if the issue persists after completing all the preceding steps.
Go to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will be directed to a local service center in your area.
To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.