HP Designjet Z5400 PostScript ePrinter Series - The printer's main components
The following front and rear views of the printer illustrate the main components.
Front view
Figure : Front view of the printer
Ink cartridge
Ink cartridge slots
Blue lever
Window
Front panel
Printhead carriage
Printhead
Output tray
Paper alignment lines
Basket
Rear view
Roll cover
Communication ports
Power switch
Power socket
Spindle
Spindle stop
Paper roll
Communication ports
Hi-Speed USB device port, to connect a computer
Gigabit Ethernet port, to connect to a network
Diagnostic LEDs, to be used by service engineers
Hi-Speed USB host port, intended for connecting an accessory
There is another Hi-Speed USB host port on the other side of the printer, beside the front panel, intended for connecting a USB flash drive.
The wall spacers
If you place the printer with its back against a wall, lower the two wall spacers at the rear of the printer to ensure that the rear of the printer is a minimum distance from the wall. Otherwise, you may experience paper advance problems.