Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Information

Need Windows 11 help?
Check the information on compatibility, upgrade, and available fixes from HP and Microsoft. Windows 11 Support Center

Feedback

hp-concentra-wrapper-portlet

Actions

Printer Specifications for HP LaserJet P1006 and P1009 Printers

HP LaserJet P1006 and P1009 models

System requirements

Physical dimensions

Print cartridge

Paper-handling specifications

Electrical specifications

Environmental specifications

Acoustic emissions

Regulatory specifications

FCC compliance

Product Specifications

Review the following sections for product-specific information.

Figure : HP LaserJet P1006 and P1009 models

HP LaserJet P1006 and P1009 models

Printer model	Part number
HP LaserJet P1006 Printer	CB411A
HP LaserJet P1009 Printer	CC444A

System requirements

Component	Details
Operating system	Microsoft Windows 2000 Microsoft Windows XP (32-bit) Microsoft Windows Vista (32-bit and 64-bit) Mac OS X v10.4 and above
Connectivity	Hi-Speed 2.0 USB port.
Base memory	8 MB RAM

Physical dimensions

Dimension	Measurement
Width	349 mm (13.7 inches)
Depth	Depth: 238 mm (9.4 inches)
Height	195 mm (7.7 inches)
Weight (cartridge installed)	5.2 kg (11.5)

Print cartridge

Color	Part number
Black	CB435A

Purchase replacement cartridges and other supplies from the HP Store or local retailers.

Paper-handling specifications

The following tables contain specifications for supported paper.

Paper tray capacities

Tray	Details
Main input tray capacity	150 sheets of regular weight 75 g/m²2 (20-lb paper )
Priority feed slot capacity	10 sheets of paper up to 163 g/m²2 (43 lb)
Top (face down) output bin capacity	100 sheets of regular weight 75 g/m²2 (20 lb) paper
Output bin	60 to 105 g/m²2 (16 lbs to 28 lbs )

Paper types and sizes

Paper type	Size
Letter	216 x 279 mm (8.5 x 11 inches)
Legal	216 x 355.6 mm (8.5 x 14 inches)
Executive	184 x 267 mm (7.24 x 10.51 inches)
A4	210 x 297 mm (8.27 x 11.69 inches)
A5	148 x 210 mm (5.83 x 8.27 inches)
A6	105 x 148 mm (4.13 x 5.83 inches)
B5 (JIS)	182 x 257 mm (7.17 x 10.12 inches)
Envelope #10	105 x 241 mm (4.13 x 9.49 inches)
Envelope DL	110 x 220 mm (4.33 x 8.66 inches)
Envelope C5	162 x 229 mm (6.93 x 9.84 inches)
Envelope B5	176 x 250 mm (6.93 x 9.84 inches)
Envelope Monarch	98 x 191 mm (3.86 x 7.52 inches)
16K	197 x 273 mm (7.75 x 10.75 inches) 195 x 270 mm (7.68 x 10.63 inches) 184 x 260 mm (7.24 x 10.24 inches)
8.5 x 13	216 x 330 mm (8.5 x 13 inches)
B5 (ISO)	176 x 250 mm (6.93 x 9.84 inches)
Post memory card	100 x 148 mm (3.94 x 5.83 inches)
Double Post memory card	148 x 200 mm (5.83 x 7.87 inches)

Printing specifications

note:
Narrow and heavy paper can cause the product to print more slowly.

Specification	Details
Print speed	16 A4 pages per minute (ppm), 17 Letter-size ppm First page out in as low as 8 seconds
Print resolution	FastRes 600: This setting provides 600 dpi effective output quality. FastRes 1200: This setting provides 1200 dpi effective output quality. EconoMode : Text is printed using less toner. This setting is useful when you are printing drafts. You can turn on this option independently of other print-quality settings.
Duty cycle	8,000 single-sided pages per month (maximum) 1,000 single-sided pages per month (average)

Electrical specifications

warning:
Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. Doing so might damage the product and void the product warranty.

Model voltage	Power requirements	Rated current
110-volt	100-127V (+/-10%) 50/60 Hz (+/-2 Hz)	4.9 amps
230-volt	220-240V (+/-10%) 50/60 Hz (+/-2 Hz)	2.9 amps

Power mode	Power use
Printing¹	285 Watts
Ready²	4 Watts
PowerSave	4 Watts
Off	0.8 Watt

¹ Power reported is highest values measured for monochrome printing using all standard voltages.

² The default time from Ready mode to PowerSave mode and the recovery time from PowerSave mode to the start of printing is negligible (less than 10 seconds) because of the instant-on fusing.

Maximum heat dissipation for all models in Ready Mode = 62 BTU/Hour.

Environmental specifications

The following information contains the environmental specifications for the product.

Recommended operating conditions

	Recommended	Operating	Storage
Temperature	17.5°C to 25°C (63.5°F to 77° F)	10°C to 32.5°C (50°F to 90.5° F)	0°C to 40°C (32°F to 104°F)
Relative Humidity	30% to 70% (no condensation)	10% to 90% (no condensation)	10% to 90% (no condensation)

Acoustic emissions

Sound power level	Declared per ISO 9296
Printing (14 PPM)	L_WAd = 6.29 Bels (A) [63 dB (A)]
Ready (PowerSave)	Inaudible

Sound pressure level bystander position	Declared Per ISO 9296
Printing (14 PPM)	L_WAd = 50 dB(A)
Ready (PowerSave)	Inaudible

Configuration tested: HP LaserJet P1006 printer, continuous monochrome printing on A4 paper at 16 PPM.

Regulatory specifications

The following information contains the regulatory specifications for the product.

FCC compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it might cause harmful interference to radio communications. However, there is no guarantee that interference does not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase separation between equipment and receiver.
Connect equipment to an outlet on a circuit different from that to which the receiver is located.
Consult your dealer or an experienced radio/TV technician.

note:
Any changes or modifications to the product that are not expressly approved by Hewlett-Packard could void the authority to operate this equipment.

Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.

hp-feedback-input-portlet

Actions

hp-feedback-banner-portlet

Actions

hp-country-locator-portlet

Actions

Country/Region: Flag

Croatia

hp-detect-load-my-device-portlet

Actions

hp-hero-support-search

Actions

Examples: "LaserJet Pro P1102 paper jam", "EliteBook 840 G3 bios update"