note:Install the cartridges as soon as possible after you remove the tape. Remove only the tape! Do not attempt to remove the copper strip.
hp-support-head-portlet

- ${title}
Loading...
HP Customer Support - Knowledge Base
hp-contact-secondary-navigation-portlet

- ${title}
Loading...
hp-share-print-widget-portlet

- ${title}
Loading...
hp-concentra-wrapper-portlet

- ${title}
Loading...
HP PSC 1310 Series - Installing Cartridges
Figure : If you have a new print cartridge, remove the tape

Figure : Make sure the printer is turned on

Figure : Open both doors on the printer, then wait a moment for the cartridge carriage to come to the center

Figure : Place the tri-color cartridge in the left slot at a slight angle, then press up and forward until the cartridge snaps into position

Figure : Place the black or photo cartridge in the right slot at a slight angle, then press up and forward until the cartridge snaps into position

Figure : Close the gray door

Additional support options
hp-feedback-input-portlet

- ${title}
Loading...
hp-feedback-banner-portlet

- ${title}
Loading...
hp-country-locator-portlet

- ${title}
Loading...
Country/Region:
Croatia

hp-detect-load-my-device-portlet

- ${title}
Loading...
hp-hero-support-search

- ${title}
Loading...