hp-support-head-portlet

動作
正在載入...
HP 顧客貼心服務 - 知識庫

hp-contact-secondary-navigation-portlet

動作
正在載入...

hp-share-print-widget-portlet

動作
正在載入...

hp-concentra-wrapper-portlet

動作
正在載入...

HP EliteBook 2530p Notebook PC - Removing and Replacing the Primary Memory Board

Introduction

This document is provided to assist in removing and replacing the Primary memory board for the HP EliteBook 2530p Notebook PC.

Minimum skill level

The End User requires no hardware-specific training to replace the defective part. The End user should have familiarity with system hardware and software requiring repair.

Tools required

P1 Phillips-head screwdriver

Parts required

注意:
Part numbers are subject to change.
The replacement part number will vary depending on the Primary memory board that is being replaced. If a part is listed as "Yes" under "Requires Return" then the defective part needs to be returned to HP. Click here for more information on returning parts to HP.
Description
Part Number
Requires Return
4 GB, 800 MHz, 200-pin, PC2-6400, SDRAM Small Outline Dual In-Line Memory Module (SODIMM)
492572-001 (Modified)
Yes
2 GB, 800 MHz, 200-pin, PC2-6400, SDRAM Small Outline Dual In-Line Memory Module (SODIMM)
492571-001 (Modified)
Yes
1 GB, 800 MHz, 200-pin, PC2-6400, SDRAM Small Outline Dual In-Line Memory Module (SODIMM)
492570-001 (Modified)
Yes
注意:
For customers in countries/regions with RoHS legislation* (e.g. EU, China, etc.) restricting the use of hazardous substances in electrical equipment. The use of the Original Spare part is regulated by RoHS legislation. If your unit contains a part that is labelled with the Modified Spare number, the Modified Spare must be ordered as the replacement part. If your unit contains a part that is labelled with the Original Spare number, please order the Original Spare as the replacement part. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit.

Summary of instructions

To view a video demonstrating the procedure for removing the Primary memory board, click on the link below. Or use the product video listing on the HP Services Media Library, then select Primary memory board from the menu on the upper left hand side of the screen.
Click here to view the Primary memory board removal video (right-click on the link to open in a new window/tab).

Primary memory board removal

  1. Review the safety considerations before performing the steps listed below by clicking on the following link:
      敬告:
    Failure to comply with the precautions could result in damage to your product or loss of data.
  2. Remove the 3 mm P1 Phillips-head screw that secures the metal primary memory board shield to the base enclosure.
  3. Lift the right edge of the primary memory board shield and slide it to the right to remove.
  4. Push both arms outward simultaneously to release the primary memory board to the spring tension position.
      敬告:
    When handling a memory board, use care to prevent touching the memory chips on the board. Touching the memory chips could damage or destroy the memory.
  5. Grasp the primary memory board by the edges and pull gently to remove it.
  6. Place the primary memory board in a static dissipative bag.

Primary memory board replacement

  1. Remove the primary memory board from the static dissipative bag.
  2. Locate the alignment slot and align it to the empty board receptacle.
  3. Grasp the primary memory board by the edges and push gently to replace it.
      敬告:
    When handling a memory board, use care to prevent touching the memory chips on the board. Touching the memory chips could damage or destroy the memory.
  4. Press the primary memory board down to latch the arms.
  5. Toe the left edge of the primary memory board shield into the base enclosure and lower it into position.
  6. Replace the 3 mm P1 Phillips-head screw that secures the metal primary memory board shield to the base enclosure.

Parts return


hp-feedback-input-portlet

動作
正在載入...

hp-feedback-banner-portlet

動作
正在載入...

hp-country-locator-portlet

動作
正在載入...
國家/地區: 中國香港

hp-detect-load-my-device-portlet

動作
正在載入...