Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Information

Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

Information

Audio or sound issues? Try our automated HP Audio check!

Information

Fix HP Printer issue on macOS
A [software component] will damage your computer message displays when printing or while installing - Click Here

Information

Create an HP account today!
Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more

hp-concentra-wrapper-portlet

Actions

HP LaserJet Enterprise, HP OfficeJet Enterprise, HP PageWide Enterprise - Troubleshooting connectivity issues

Every HP Enterprise printer has LEDs in the formatter board to identify and troubleshoot problems.

Connectivity LED - indicates installation accuracy

Note:
Present only on formatters that are customer-replaceable. Formatters replaced by a service technician will not have a Connectivity LED.
Jetdirect LED - indicates network activity
Heartbeat LED - indicates operating correctly

Location of formatter LEDs

Note:

The location of the formatter LEDs might differ slightly depending on your printer model.

Close-up view

Formatter LEDs
Callout	LED Description
1	Connectivity LED
2	Jetdirect LEDs
3	Heartbeat LED

Always look directly at the LEDs; looking at them from an angle might make it difficult to differentiate the colors.

Connectivity LED

Indicates installation accuracy.

Note:

For more information on checking or replacing the parts referenced in this document, visit support.hp.com or contact HP Technical Support.

Connectivity LED light patterns
LED light pattern	Description	Action
	A solid green light indicates that the formatter is installed correctly and the power is on.	Normal status. No action required.
	No lights on indicates that the formatter is not installed correctly, or there is no power.	Check the power cable and source. Remove and then reinstall the formatter to verify that it is installed correctly. Visit support.hp.com for model specific installation instructions.

Jetdirect LEDs

The embedded HP Jetdirect print server has two LEDs. The yellow LED indicates network activity, and the green LED indicates the link status. A blinking yellow LED indicates network traffic. If the green LED is off, a link has failed.

Note:

For more information on checking or replacing the parts referenced in this document, visit support.hp.com or contact HP Technical Support.

Jetdirect LED light patterns
LED light pattern	Description	Action
	Solid green light and flashing yellow light indicates a successful network connection.	No action required.
	No lights on	Disconnect and reconnect the cable to the port. In the Network Settings Menu, verify the link settings and make sure that the port is enabled.

Heartbeat LED

The heartbeat LED indicates whether or not the formatter is functioning correctly. While the product is initializing after it is turned on, the LED is green and blinks rapidly, and then turns off. When the product has finished the initialization sequence, the heartbeat LED is green and pulses on and off. If the LED is red or amber, this is an indication that something is wrong.

The following provides information about product operation and formatter health.

Note:

For more information on checking or replacing the parts referenced in this document, visit support.hp.com or contact HP Technical Support.

Heartbeat LED light patterns
LED light pattern	Description	Action
	A solid green light is lit during product start up.	Normal status. No action required.
	A slow blinking green light indicates normal operation/sleep mode.	Normal status. No action required.
	A blinking amber light indicates that the formatter cannot connect to the control panel.	Remove and reinsert the control panel cable at both ends. Check (and replace, if necessary) the control panel, connection cable, and the formatter.
	A solid amber light indicates that the flat-flexible cable (FFC) between the formatter and the DC controller is not connected, or it is damaged. Note: This does not apply to formatters that are customer-replaceable.	Check, and if necessary, replace the formatter to DC flat-flexible cable (FFC). Note: This action should be performed only by a service technician.
	A solid red light indicates a formatter failure.	Remove and then reinstall the formatter to verify that it is installed correctly. Check (and replace, if necessary) the fax card and/or memory DIMM (if present). If the error persists, replace the formatter.
	No lights on indicates one of the following issues: No power Firmware or system freeze	Check the power cable and source, and then turn on the printer. Watch the Heartbeat LED for activity during the boot process. If the heartbeat LED remains off, check the front panel for any error messages. If you are unable to clear the error message, then upgrade the printer firmware. For steps on upgrading the firmware, refer to the following document: HP LaserJet Enterprise, HP OfficeJet Enterprise, HP PageWide Enterprise - Update the printer firmware

hp-feedback-input-portlet

Actions

hp-feedback-banner-portlet

Actions

hp-country-locator-portlet

Actions

Country/Region: Hong Kong SAR

hp-detect-load-my-device-portlet

Actions

hp-hero-support-search

Actions

Examples: "DeskJet 2130 paper jam", "EliteBook 840 G3 bios update"