HP Desktop PCs - motherboard specifications, Odense2-S

Figure : The Odense2-S motherboard

Motherboard description

HP name: Odense2-S
SSID: 828A

Form Factor

uATX
Dimensions: 24x24 cm (9.4x9.4 in)

Chipset

H170

Processor upgrade information

TDP: Up to 91 W
Socket type: LGA 1151

Motherboard supports the following processor upgrades:

Processor	TDP	Integrated Graphics
Intel Core i7-6700K (Skylake) 4.0 GHz Quad Core (only with Ariia+)	91 W	Intel HD Graphics (GT2)
Intel Core i7-6700 (Skylake) 3.4 GHz Quad Core	65 W	Intel HD Graphics (GT2)
Intel Core i5-6400 (Skylake) 2.7 GHz Quad Core	65 W	Intel HD Graphics (GT2)
Intel Core i3-6100 (Skylake) 3.7 GHz Dual Core (only with Hal2)	51 W	Intel HD Graphics 530

Memory upgrade information

Dual channel (one DIMM per channel) memory architecture
Two DDR4 UDIMM (288-pin) sockets
Supports up to PC4-17000 (DDR4-2133)
Supports 4 GB and 8 GB UDIMMs
Supports up to 4 GB on 32-bit systems

note:
32-bit systems cannot address a full 4.0 GB of memory.
Supports up to 16 GB (unbuffered) on 64-bit computers

note:
Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.

Video

Integrated graphics

Integrated Intel HD Graphics

note:
Integrated video is not available if a graphics card is installed.

Audio

Integrated audio

Audio Codec: ALC3863-CG
High Definition (Azalia) 5.1 channel audio support

note:
The motherboard supports 5.1 surround sound. If the computer does not have the required audio jacks for a 5.1 configuration, additional hardware is required to use 5.1 surround sound.
Audio jack presence detection

note:
An internal speaker is not included with integrated audio. External speakers or headphones are required to hear sound.

note:
Integrated audio is not available if a sound card is installed.

Network

LAN: 1000BASE-T

Technology: Realtek RTL8161
Data transfer speeds: up to 10/100/1000 Mb/s
Transmission standards: 1000BASE-T Ethernet

Expansion Slots

One PCI Express x16 (Gen 3.0)
One PCI Express x1 (Gen 3.0)
One M.2 socket 1, key A

I/O Ports and Jumpers

Back I/O ports

note:
The configuration might vary depending on your model (for example, if a dedicated graphics card is included). Any modification or upgrades might change the configuration, port accessibility, and port functionality.

Figure : Odense2-S back I/O panel

USB 2.0: 2

LAN (Ethernet)

HDMI out

USB 3.0: 2

Audio: Line in

Audio: Line out

Audio: Microphone

Jumpers

Figure : Clear CMOS and clear password jumpers in the default positions