Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

Υποστήριξη πελατών HP - Γνωσιακή βάση δεδομένων

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Ανατροφοδότηση

hp-concentra-wrapper-portlet

Actions

Loading Paper and Envelopes for HP LaserJet Pro 200 Color MFP M276n and M276nw Printers

Introduction

This document describes how to load paper and envelopes into the printer.

Loading paper

Follow these steps to load paper.

Loading the paper input tray

Follow these steps to load paper into the paper input tray.

Pull out the paper input tray.

Εικόνα : Pull out the paper input tray
Slide the paper guides to their outermost positions.

Εικόνα : Slide out the paper guides

σημείωση:
To load legal-size paper, extend the tray by pressing and holding the extension tab while pulling the front of the tray outward.

Εικόνα : Extend tray for legal paper
Place the stack of paper print side up in the tray, and then make sure that the stack is flat at all four corners.
Slide the paper guides inward so that they rest against the stack of paper.

Εικόνα : Slide the paper guides inward
Push down on the paper to make sure that the paper stack sits below the paper limit tabs on the sides of the tray.

σημείωση:
The tray capacity is 150 sheets.

Εικόνα : Push down on the paper
Slide the paper tray into the printer.

Εικόνα : Insert the paper tray

Loading Envelopes

Envelope Guidelines

Do not use envelopes with clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic materials that are susceptible to heat.
Do not use envelopes that are wrinkled, nicked, stuck together, or otherwise damaged.
If you use envelopes with peel-off adhesive strips, make sure they are approved for use in laser printers.
Only use envelopes recommended for laser printers.
Use envelopes with seams that extend to the corners.
Acceptable

Unacceptable

Follow these steps to load envelopes into the paper input tray.

Pull the paper tray out of the printer.

Εικόνα : Pull out the paper tray
Slide the paper guides to their outermost positions.

Εικόνα : Slide out the paper guides
Remove any paper from the tray.
Load envelopes in the middle of the tray with the print side facing up and the stamp end in first.

Εικόνα : Load envelopes this way

σημείωση:
The tray capacity is 10 envelopes.
Slide the paper guides inward so that they rest against the envelopes.
Slide the paper input tray back into the printer.

hp-feedback-input-portlet

Actions

hp-feedback-banner-portlet

Actions

hp-country-locator-portlet

Actions

Χώρα/περιοχή: Flag

Ελλάδα

hp-detect-load-my-device-portlet

Actions

hp-hero-support-search

Actions

Παραδείγματα: “Officejet 4500 - G510 εμπλοκή χαρτιού”, “HP 250 G5 bluetooth”