hp-support-head-portlet

Actions
Loading...
Υποστήριξη πελατών HP - Γνωσιακή βάση δεδομένων

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Ανατροφοδότηση

hp-concentra-wrapper-portlet

Actions
Loading...

HP LaserJet 1020 and 1022 Printer Series - Setting Up the LaserJet (Hardware)

Introduction

This document explains how to set up the physical parts of the product. Complete these steps before you install the product software on your computer.
This document includes the following steps to set up the product:
  • Unpack the printer and check the contents
  • Remove the packing tape
  • Install the print cartridge
  • Connect the power cord
  • Turn on the product
  • Load plain paper

Setting up the printer

Follow these steps in order.

Step one: Unpack the printer and check the contents

  1. Remove the product from the box.
    Εικόνα : Remove the product from the box
    Illustration: Remove the product from the box
  2. Check the contents of the box.
The contents might vary by country/region. See the packaging for a list of items shipped in the box.

Step two: Remove the packing tape

  1. Open the print cartridge access door.
    Εικόνα : Open the print cartridge access door
    Illustration: Open the print cartridge access door
  2. Remove all the orange packing tape from the product.
    Εικόνα : Remove the orange packing tape
    Illustration: Remove the orange packing tape

Step three: Install the print cartridge

  1. Open the output tray support, and then open the print cartridge door.
    Εικόνα : Open the output tray support
    Illustration: Open the output tray support
    Εικόνα : Open the print cartridge door
    Illustration: Open the print cartridge door
  2. Remove the new print cartridge from the package.
      προσοχή:
    Hold the print cartridge at each end to prevent damage to the print cartridge.
    Εικόνα : Remove the new print cartridge from the package
    Illustration: Remove the new print cartridge from  the  package
  3. Gently rock the print cartridge back and forth to distribute the toner evenly.
    Εικόνα : Rock the print cartridge back and forth
    Illustration: Rock the print cartridge
back and forth
  4. Pull the orange tab until all the sealing tape is removed from the print cartridge. Put the tab in the print cartridge box to return for recycling.
    Εικόνα : Pull the orange tab to remove the sealing tape
    Illustration: Pull the tab to remove the sealing tape
  5. Insert the print cartridge in the product, and then close the print cartridge door.
    Εικόνα : Insert the print cartridge
    Illustration: Insert the print cartridge

Step four: Connect the power cord

Connect the power cord to the back of the product, and then plug the power cord into an electrical outlet.
Εικόνα : Connect the power cord
Illustration: Connect the power cord

Step five: Turn on power

Press the Power switch to turn on the product.
Εικόνα : Press the Power switch
Illustration: Press the Power switch

Step six: Load plain paper

  1. Slide the paper width and length guides to their outmost positions.
    Εικόνα : Slide out the paper guides
    Illustration: Slide out the paper guides
  2. Load the paper into the paper tray, and then slide the paper width and length guides inward until they stop at the edge of the paper.
      προσοχή:
    Do not use stapled, wrinkled, folded, or damaged paper.
    Εικόνα : Load the paper and slide in paper guides
    Illustration: Load the paper and slide in paper guides
  3. Insert the input tray cover over the main input tray.
    Εικόνα : Insert the input tray cover
    Illustration: Insert the input tray cover
  4. Close the input tray.
    Εικόνα : Close the input tray
    Illustration: Close the input tray cover

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Χώρα/περιοχή: Flag Ελλάδα

hp-detect-load-my-device-portlet

Actions
Loading...