hp-support-head-portlet

Actions
Loading...
Υποστήριξη πελατών HP - Γνωσιακή βάση δεδομένων

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Photosmart C6100 All-in-One Series - Installing the Ink Cartridges

Introduction

This document contains information about installing the ink cartridges.

Install the print cartridges

σημείωση:
The HP All-in-One must be on before you can insert the printcartridges.
  1. After you press the On button, wait for the prompton the color graphics display before continuing.
  2. Open the access door by lifting it until it stops.
    Εικόνα : Opening the access door
  3. Squeeze the bottom of each latch to release it, andthen lift the latch.
    Εικόνα : Release latch
  4. Lift all six latches.
    Εικόνα : All latches lifted
  5. Match the color and pattern of the ink cartridge to thecolor and pattern on the print carriage.
    1. Push the black ink cartridge into the first slot on theleft. Close the latch.
      Εικόνα : Black ink cartridge installation
    2. Repeat with each of the color ink cartridges.
      Εικόνα : Color ink cartridge installation
    3. Make sure each latch is secure.
      Εικόνα : All cartridges installed
      σημείωση:
      Use only the ink cartridges that came withthe printer. The ink in these cartridges is speciallyformulated to mix with the ink in the print headassembly at first-time setup.
  6. Close the access door and follow the prompts on the color graphics display.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Χώρα/περιοχή: Flag Ελλάδα

hp-detect-load-my-device-portlet

Actions
Loading...