hp-support-head-portlet

Actions
Loading...
Υποστήριξη πελατών HP - Γνωσιακή βάση δεδομένων

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Ανατροφοδότηση

hp-concentra-wrapper-portlet

Actions
Loading...

HP LaserJet 1018 and 1018s Printers - Setting up the LaserJet (Hardware)

Introduction

This document explains how to set up the physical parts of the product. Complete these steps before you install the product software on your computer.
This document includes the following steps to set up the product:
  • Unpack the printer and check the contents
  • Remove the packing tape and install the paper guide
  • Install the print cartridge
  • Connect the power cord
  • Turn on power
  • Load plain paper

Setting up the printer

Follow these steps in order.

Step one: Unpack the printer and check the contents

  1. Remove the product from the box.
    Εικόνα : Remove the product from the box
    Illustration: Remove the product from the box
  2. Check the contents of the box.
The contents might vary by country/region. See the packaging for a list of items shipped in the box.

Step two: Remove the packing tape and install the paper guide

  1. Open the paper tray.
    Εικόνα : Open the paper tray
    Ilustration: Open the paper tray
  2. Remove all the orange packing tape from the product.
    Εικόνα : Remove the packing tape
    Illustration: Remove the packing tape
  3. Install the output paper guide.
    Εικόνα : Install the output paper guide
    Illustration: Install the output paper guide

Step three: Install the print cartridge

  1. Open the print cartridge door.
    Εικόνα : Open the print cartridge door
    Illustration: Open the print cartridge door
  2. Remove the print cartridge from the packing material, and then rotate the print cartridge back-and-forth approximately five times to mix the toner.
    Εικόνα : Remove the print cartridge and rotate
    Illustration: Remove the print cartridge and rotate
  3. Remove the sealing tape from the print cartridge.
    Εικόνα : Remove the sealing tape
    Illustration: Remove the sealing tape
  4. Insert the print cartridge, and then close the print cartridge door.
    Εικόνα : Insert the print cartridge and close the door
    Illustration: Insert the print cartridge and close the door

Step four: Connect the power cord

Connect the power cord to the back of the product, and then plug the power cord into an electrical outlet.
Εικόνα : Connect the power cord
Illustration: Connect the power cord

Step five: Turn on power

Press the Power switch to turn on the product.
Εικόνα : Press the Power switch
Illustration: Press the Power switch

Step six: Load plain paper

  1. Slide the paper width and length guides to their outmost positions.
    Εικόνα : Slide out the paper guides
    Illustration: Slide out the paper guides
  2. Load the paper into the paper tray, and then slide the paper width and length guides inward until they stop at the edge of the paper.
    Εικόνα : Load the paper and slide in paper guides
    Illustration: Load the paper and slide in paper guides.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Χώρα/περιοχή: Flag Ελλάδα

hp-detect-load-my-device-portlet

Actions
Loading...

hp-hero-support-search

Actions
Loading...