-
Connect the network cable to the product and to the network.Figure : Network connection
-
Wait for 60 seconds before continuing. During this time, the network recognizes the product and assigns an IP address or host name for the product.
-
At the product control panel, press the Home button
.
-
Press the down arrow
to highlight the Administration menu, and then press the OK button.
-
Press the down arrow
to highlight the Reports menu, and then press the OK button.
-
Press the down arrow
to highlight the Configuration/Status Pages menu, and then press the OK button.
-
Press the down arrow
to highlight the Configuration Page menu, and then press the OK button.
-
Find the IP address on the Embedded Jetdirect page.Figure : IP address location
-
IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, you must manually configure the IP address. See Manually configure IPv4 TCP/IP parameters from the control panelManually configure IPv4 TCP/IP parameters from the control panel. Otherwise, the network configuration was successful.IPv6: If the IP address begins with "fe80:", the product should be able to print. If not, you must manually configure the IP address. See Manually configure IPv6 TCP/IP parameters from the control panelManually configure IPv6 TCP/IP parameters from the control panel.
hp-support-head-portlet

- ${title}
Loading...
HP Customer Support - Knowledge Base
hp-contact-secondary-navigation-portlet

- ${title}
Loading...
hp-share-print-widget-portlet

- ${title}
Loading...
hp-concentra-wrapper-portlet

- ${title}
Loading...
HP Color LaserJet Enterprise CP5520 Printer Series - Install software for Mac computers on a wired network
Configure the IP address
Install the Mac software
Mac
-
Quit all programs on the computer.
-
Install the software from the CD.
-
Click the product icon, and follow the onscreen instructions.
-
Click the Close button when the installation is complete.
-
At the computer, open the Apple menu
, click the System Preferences menu, and then click the Print & Fax icon.
-
Click the plus symbol (+).By default, Mac OS X uses the Bonjour method to find the driver and add the product to the printer pop-up menu. This method is best in most situations. If Mac OS X cannot find the HP printer driver, an error message displays. Reinstall the software.If you are connecting the product to a large network, you might need to use IP printing to connect rather than Bonjour. Follow these steps:
-
Click the IP Printer button.
-
From the Protocol drop-down list, select the HP Jetdirect-Socket option. Enter the IP address or host name for the product. From the Print Using drop-down list, select the product model if one is not already selected.
-
-
To configure the product to recognize the installed accessories, complete these steps:Mac OS X 10.4
-
From the Apple menu
, click the System Preferences menu and then click the Print & Fax icon.
-
Click the Printer Setup button.
-
Click the Installable Options menu.
Mac OS X 10.5 and 10.6-
From the Apple menu
, click the System Preferences menu and then click the Print & Fax icon.
-
Select the product in the left side of the window.
-
Click the Options & Supplies button.
-
Click the Driver tab.
-
Configure the installed options.
note:
For Mac OS X 10.5 and 10.6, the installation procedure should automatically configure the installed options. -
-
Print a page from any program to make sure that the software is correctly installed.
note:If the installation failed, reinstall the software.
Additional support options
hp-feedback-input-portlet

- ${title}
Loading...
hp-feedback-banner-portlet

- ${title}
Loading...
hp-country-locator-portlet

- ${title}
Loading...
Country/Region:
Middle East
hp-detect-load-my-device-portlet

- ${title}
Loading...
hp-hero-support-search

- ${title}
Loading...