Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Information

Fix HP Printer issue on macOS
A [software component] will damage your computer message displays when printing or while installing - Click Here

Information

Audio or sound issues? Try our automated HP Audio check!

Information

Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

Information

Create an HP account today!
Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more

hp-concentra-wrapper-portlet

Actions

HP and Compaq Desktop PCs - Motherboard Specifications, IPIEL-LA3 (Eureka3)

Figure : The IPIEL-LA3 (Eureka3) motherboard

Motherboard description

Manufacturer's motherboard name: Pegatron IPIEL-LA3
HP/Compaq name: Eureka3-GL8

Form Factor

24.5 cm (9.6 in) x 24.5 cm (9.6 in)

Chipset

Intel G43 Express

Front-side bus speed

1333/1066/800 MHz

Processor upgrade information

TDP: 95W
Motherboard supports the following processor upgrades:
- Intel Core 2 Quad (Yorkfield core) series
- Intel Core 2 Duo (Wolfdale core) Dual Core series

Memory upgrade information

Memory upgrade information:

Four DDR3 DIMM (240-pin) sockets
Supports 2 GB DDR3 DIMMs
Supports dual channel memory architecture
Supported speeds:
- PC3-8500 @ 1066 MHz
- PC3-6400 @ 800 MHz
Non-ECC memory only, unbuffered
Supports up to 8 GB on 64-bit PCs
Supports up to 4 GB* on 32-bit PCs

Video

Integrated Intel GMA X4500 HD graphics

Supports PCI Express x16 graphics card

note:
Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.

Audio

Integrated Realtek ALC888S

Integrated High Definition audio

Audio CODEC: Realtek ALC888S
High Definition 7.1 channel audio

Networking

LAN: Gigabit 10-Base-GT

Technology: Realtek 8111DL
Data transfer speeds: up to 10/100/1000 Mb/s
Transmission standards: Gigabit 10-Base-GT Ethernet

Expansion Slots

One PCI Express x16 graphics (for a graphics card)
Three PCI Express x1 (for cards such as network, sound, tv-tuner)

I/O Ports

Back I/O ports

Figure : Back I/O panel

Coaxial SPDIF Out port.

Video Graphics Adapter port.

RJ45 Network (LAN)

Audio: Center/Subwoofer (yellow orange)

Audio: Rear Speaker Out (black)

Audio: Line In (light blue)

Audio: Line Out (lime)

Audio: Microphone (pink)

Side Speaker Out (gray)

USB 2.0: 4

DVI port

Internal Connectors

One 24-pin ATX power connector
One 4-pin ATX power connector
One CPU fan connector
One PC fan connector
Four SATA connectors
Two USB 2.0 connectors (dual ports)
Four USB 2.0 connectors (single port) (Note: Some USB ports may not be available externally.)
One S/PDIF audio out connector
One 9-pin audio header for headphone-out and microphone-in (yellow, requires matching front audio jack module)
One 9-pin header for for power button, reset button, power LED, and HDD LED
One jumper for resetting BIOS settings
One jumper to disable BIOS password checking

Motherboard layout

Figure : layout

Clearing the CMOS settings

caution:
Do not change any jumper setting while the computer is on. Damage to the motherboard can result.

This motherboard has a jumper to clear the Real Time Clock (RTC) RAM in CMOS.

To clear CMOS, follow these steps:

Temporarily set jumper CLEAR_CMOS to pins 2-4.
Wait 5-10 seconds and then return the jumper to pins 4-6.
When you start the PC you will need to enter BIOS setup to reset any custom BIOS settings.

Clearing the PASSWORD settings

The BIOS password is used to protect BIOS settings from unwanted changes. If you have forgotten your password you may disable password checking.

To erase the BIOS password follow these steps:

Turn OFF the computer and unplug the power cord.
Locate the jumper labeled CLEAR_PWD. In the default (normal) position the jumper is on pins 3-5.
Move the jumper on jumper CLEAR_PWD to pins 1-3 to clear password.
Plug in the power cord and turn ON the computer.
Hold down the F10 key during the startup process and enter BIOS setup to change or clear the password.
After changing or clearing the BIOS passwords, remember to reset the jumper to pins 3-5.

hp-feedback-input-portlet

Actions

hp-feedback-banner-portlet

Actions

hp-country-locator-portlet

Actions

Country/Region: Middle East

hp-detect-load-my-device-portlet

Actions

hp-hero-support-search

Actions

Examples: "DeskJet Ink Advantage 4530 paper jam", "HP 240 G5 bluetooth"