HP DeskJet 2130, 2300 Printers - Loading Paper, Envelopes and Cards

Remarque :

Do not use shiny or embossed envelopes or envelopes that have clasps or windows.

1. Raise the input tray.
   Figure : Raise the input tray

   
2. Remove any paper from the input tray that is different than the envelopes you want to load, and then slide the paper width guide as far as possible to the left.
   Figure : Slide the paper width guide to the left

   
3. Load the envelopes into the far-right side of the input tray. Make sure the print side is facing closest to you, and the side with the flap is on the left, facing down.
   Do not load more than 5 envelopes into to input tray at a time.
   Figure : Load the envelopes into the input tray

   
4. Slide the paper width guide to the right until it rests at the edge of the envelopes.
   Figure : Slide the paper width guide to the right

   
5. Lower the output tray and pull out the output tray extender.
   Figure : Lower the output tray and pull out the output tray extender

   

1. Raise the input tray.
   Figure : Raise the input tray

   
2. Remove any paper from the input tray that is different than the photo paper you want to load, and then slide the paper width guide as far as possible to the left.
   Figure : Slide the paper width guide to the left

   
3. Load one or more photo paper sheets into the far-right side of the input tray. Make sure that the short edge is down and the print side is facing closest to you, and then slide the stack of paper down until it stops.
   For photo paper with a perforated tab, place the paper in the input tray print-side up with the perforated tab closest to you.
   Do not load more than 20 photo paper sheets at a time.
   Figure : Load the photo paper into the input tray

   
4. Slide the paper width guide to the right until it rests at the edge of the photo paper.
   Figure : Slide the paper width guide to the right

   
5. Lower the output tray and pull out the output tray extender.
   Figure : Lower the output tray and pull out the output tray extender

   

   Remarque :

   Do not leave any photo paper in the input tray after you finish printing, as the quality of the paper might deteriorate. Store photo paper in a sealed bag in a cool, dark place.

1. Raise the input tray.
   Figure : Raise the input tray
   
2. Remove any paper from the input tray that is different than the index cards you want to load, and then slide the paper width guide as far as possible to the left.
   Figure : Slide the paper width guide to the left

   
3. Load one or more index cards into the right side of the input tray. Make sure that the short edge is down and the print side is facing closest to you, and slide the stack of index cards down until it stops.
   Do not load more than 20 index cards at a time.
   Figure : Load the index cards into the input tray

   
4. Slide the paper width guide to the right until it rests at the edge of the index cards.
   Figure : Slide the paper width guide to the right

   
5. Lower the output tray and pull out the output tray extender.
   Figure : Lower the output tray and pull out the output tray extender