HP LaserJet Tank 1020, 1500, 2500 printers - Printing reports and self-test pages

Print an Information Report to find a summary of the printer information and its current status.

1. Turn on the printer.

2. On the printer control panel, press the Information button .

An Information Report prints.

Print a Configuration Report to find the product information, supplies status, event log, energy settings, and Web Services status.

1. On the printer control panel, press and hold the Information button for five seconds to enable support mode.

   All buttons on the control panel light up.

2. Press the Resume button .

   Note:

   For HP LaserJet Tank 1020 printers, press and hold the Resume button for five seconds to print the Configuration Report.

A Configuration Report prints.

Print a Wireless Network Test Report to find the printer IP address and network diagnostics summary.

1. Make sure the printer is connected to an active wireless network.

2. On the printer control panel, press and hold the Information button for five seconds.

   All buttons on the control panel light up.

3. Press the Information button and Resume button simultaneously.

A Wireless Network Test Report prints.

Print an Adjust Alignment Test Page to center the print image on the page.

1. Open HP Smart and select your printer.

2. Click Advanced settings.

   Note:

   For Windows 7 and 8, open HP Printer Assistant, select Print, and then click Printer Home Page (EWS).

3. Click System > Service.

4. In the Adjust Alignment section, from the Tray 1 Size drop-down list, select the size, and then enter the values for X1 Shift, X2 Shift, and Y Shift.

5. Click Print Test Page.

An Adjust Alignment Test Page prints.

Alignment Test Page (front)

Alignment Test Page (back)