hp-support-head-portlet
Actions
- ${title}
hp-contact-secondary-navigation-portlet
Actions
- ${title}
hp-share-print-widget-portlet
Actions
- ${title}
hp-concentra-wrapper-portlet
Actions
- ${title}
HP LaserJet Pro MFP - Configure the send fax settings
Use the information in this document to configure the receive fax settings on your HP LaserJet Pro printer.
The steps vary according to the type of control panel.
Touchscreen with white background
Touchscreen with black background
Click the section below for your control-panel type and then follow the steps provided.
Touchscreen control panel with white background
The information in this section pertains to HP LaserJet Pro MFP models that have a touchscreen control panel with a white background.
Touchscreen with white background
The following sections contain instructions on how to configure the various send fax settings.
Click a section heading to expand the section and then follow the steps provided.
Set a dialing prefix
A dial prefix is a number or group of numbers that are automatically added to the beginning of every fax number that you enter on the printer control panel or in the fax software. The maximum number of characters for a dial prefix is 50.
The default setting is Off. You might want to turn on this setting and enter a prefix if, for example, you have to dial a number, such as 9, to get a telephone line outside of your company telephone system. When this setting is active, you can dial a fax number without dialing the prefix by using manual dial.
-
From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
.
-
Scroll to and touch Fax Setup, and then touch Preferences.
-
Scroll to and touch Dialing Prefix, and then touch On.
-
Use the keypad to enter the prefix, and then touch the OK button. You can use numbers, pauses, and dialing symbols.
Tone dial or pulse dial
Use this procedure to set the printer to tone-dialing or pulse-dialing mode. The factory-set default is Tone. Do not change this setting unless you know that the telephone line cannot use tone dialing.
The pulse-dialing option is not available in all countries/regions.
-
From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
-
Scroll to and touch Fax Setup, and then touch Preferences.
-
Touch Dial Type, and then touch Tone or Pulse.
Set the auto-redial options
If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the printer attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on-communication-error settings.
-
From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
-
Scroll to and touch Fax Setup, and then touch Preferences.
-
Touch Auto Redial.
-
Touch any of the following settings to turn them on or off:
-
Busy Redial: If this setting is on, the printer automatically redials if it receives a busy signal.
-
No Answer Redial: If this setting is on, the printer automatically redials if the receiving machine does not answer.
-
Connection Problem Redial: If this setting is on, the printer automatically redials if a communication error occurs.
-
Set billing codes
If the billing codes feature is on, the printer prompts you to enter a billing code for each fax. The printer increases the billing code count for each sent fax page. This includes all types of faxes except for poll-received, fax-forwarded, or computer-downloaded faxes. For an undefined group or a group-dial fax, the printer increases the billing code count for each successful fax that is sent to each destination.
The factory-set default for the billing-code setting is Off. The billing code can be any number from 1 through 250.
-
From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
-
Scroll to and touch Fax Setup, and then touch Preferences.
-
Touch Billing Code, and then touch On.
Print the billing-code report
The billing-code report is a printed list of all the fax billing codes and the total number of faxes billed to each code.
After the printer prints this report, it deletes all billing data.
-
From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
-
Scroll to and touch Fax Setup, and then touch Reports.
-
Touch Print Fax Reports.
Touchscreen control panel with black background
The information in this section pertains to HP LaserJet Pro MFP models that have a touchscreen control panel with a black background.
Touchscreen with black background
The following sections contain instructions on how to configure the various send fax settings.
Click a section heading to expand the section and then follow the steps provided.
Set a dialing prefix
A dial prefix is a number or group of numbers that are automatically added to the beginning of every fax number that you enter on the printer control panel or in the fax software. The maximum number of characters for a dial prefix is 50.
The default setting is Off. You might want to turn on this setting and enter a prefix if, for example, you have to dial a number, such as 9, to get a telephone line outside of your company telephone system. When this setting is active, you can dial a fax number without dialing the prefix by using manual dial.
-
From the Home screen on the printer control panel, touch the Setup button
.
-
Touch the Fax Setup menu.
-
Touch the Basic Setup menu.
-
Scroll to and touch the Dial Prefix button, and then touch the On button.
-
Use the keypad to enter the prefix, and then touch the OK button. You can use numbers, pauses, and dialing symbols.
Set the dial tone detection
Normally, the printer begins dialing a fax number immediately. If you are using the printer on the same line as your telephone, turn on the detect-dial-tone setting. This prevents the printer from sending a fax while someone is on the telephone.
The factory-set default for detect dial tone is On for France and Hungary, and Off for all other countries/regions.
-
From the Home screen on the printer control panel, touch the Setup button
-
Touch the Fax Setup menu.
-
Touch the Advanced Setup menu.
-
Scroll to and touch the Detect Dial Tone button, and then touch the On button.
Tone dial or pulse dial
Use this procedure to set the printer to tone-dialing or pulse-dialing mode. The factory-set default is Tone. Do not change this setting unless you know that the telephone line cannot use tone dialing.
The pulse-dialing option is not available in all countries/regions.
-
From the Home screen on the printer control panel, touch the Setup button
-
Touch the Fax Setup menu.
-
Touch the Advanced Setup menu.
-
Scroll to and touch the Dialing Mode button, and then touch the Tone or Pulse button.
Set the auto-redial options
If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the printer attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on-communication-error settings.
-
From the Home screen on the printer control panel, touch the Setup button
-
Touch the Fax Setup menu.
-
Touch the Advanced Setup menu.
-
Scroll to and touch any of the following settings to turn them on or off:
-
Redial if Busy: If this setting is on, the printer automatically redials if it receives a busy signal.
-
Redial if No Answer: If this setting is on, the printer automatically redials if the receiving machine does not answer.
-
Redial if Comm. Error: If this setting is on, the printer automatically redials if a communication error occurs.
-
Set the default light/dark (contrast) setting
The contrast affects the lightness and darkness of an outgoing fax as it is being sent.
The default light/dark setting is the contrast that is normally applied to items that are being faxed. The slider is set to the middle as the default setting.
-
From the Home screen on the printer control panel, touch the Setup button
-
Touch the Fax Setup menu.
-
Touch the Advanced Setup menu.
-
Touch the Lighter/Darker button, and then touch one of the arrows to adjust the slider.
Set the default resolution setting
Use this procedure to change the default resolution for all fax jobs. The factory-set default resolution setting is Fine.
Increasing the resolution increases the fax file size. Larger faxes increase the send time and could exceed the available memory in the printer.
-
From the Home screen on the printer control panel, touch the Setup button
-
Touch the Fax Setup menu.
-
Touch the Advanced Setup menu.
-
Touch the Fax Resolution button, and then touch one of the following options:
-
Standard: This setting provides the lowest quality and the fastest transmission time.
-
Fine: This setting provides a higher resolution quality than Standard that is usually appropriate for text documents.
-
Superfine: This setting is best used for documents that mix text and images. The transmission time is slower than the Fine setting, but faster than the Photo setting.
-
Photo: This setting produces the best images, but greatly increases the transmission time.
-
Set billing codes
If the billing codes feature is on, the printer prompts you to enter a billing code for each fax. The printer increases the billing code count for each sent fax page. This includes all types of faxes except for poll-received, fax-forwarded, or computer-downloaded faxes. For an undefined group or a group-dial fax, the printer increases the billing code count for each successful fax that is sent to each destination.
The factory-set default for the billing-code setting is Off. The billing code can be any number from 1 through 250.
-
From the Home screen on the printer control panel, touch the Setup button
-
Touch the Fax Setup menu.
-
Touch the Advanced Setup menu.
-
Scroll to and touch the Billing Codes button, and then touch the On button.
Set special dialing symbols and options
You can insert pauses into a fax number that you are dialing. Pauses are often needed when dialing internationally or connecting to an outside line.
|
Special symbol |
Button |
Description |
|---|---|---|
|
Dialing pause |
|
This button is available on the control panel keypad for entering a fax number. You can also touch the comma button to insert a dialing pause. |
|
Pause for dial tone |
|
This button is available only when you are entering the fax number for a phone book entry. This character causes the printer to wait for a dial tone before dialing the remainder of the telephone number. |
|
Hook flash |
|
This button is available only when you are entering the fax number for a phone book entry. This character causes the printer to insert a hook flash. |
hp-feedback-input-portlet
Actions
- ${title}
hp-feedback-banner-portlet
Actions
- ${title}
hp-country-locator-portlet
Actions
- ${title}
hp-detect-load-my-device-portlet
Actions
- ${title}
hp-hero-support-search
Actions
- ${title}
