Samsung SCX-4829 Laser MFP - Clearing Original Document Jams

Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions

hp-hero-support-search

Actions

Examples: "Deskjet Ink Advantage K109 paper jam", "ProBook 4540s bios update"

hp-share-print-widget-portlet

Actions

Information

Information regarding recent vulnerabilities
HP is aware of the recent vulnerabilities commonly referred to as "Spectre" and "Meltdown". HP has published a security bulletin with patches for these issues and a list of impacted systems. We will continue to update the bulletin as more information becomes available and encourage customers to check the bulletin frequently.

hp-concentra-wrapper-portlet

Actions

Samsung SCX-4829 Laser MFP - Clearing Original Document Jams

The following procedure shows how to clear original document jams.

When an original document jams while passing through the automatic document feeder (ADF), Document Jam appears on the display.

Clearing document jams

Input misfeed

Remove any remaining pages from the ADF.
Open the ADF cover.
Figure : ADF cover, open

ADF cover
Rotate the bushing on the right end of the ADF roller toward the ADF (1) and remove the roller from the slot (2). Pull the document gently to the left and out of the ADF.

Figure : Rotate bushing, remove paper

note:

This illustration might differ from the printer depending on its model.
Align the left end of the ADF roller with the slot and push the right end of the ADF roller into the right slot (1). Rotate the bushing on the right end of the roller toward the document input tray (2).

Figure : Align roller
Close the ADF cover. Then load the removed pages, if any, back into the ADF.

note:

To prevent document jams, use the scanner glass for thick, thin, or mixed paper-type originals.

Exit misfeed

Remove any remaining pages from the ADF.
Seize the misfeed paper, and remove the paper from the document output tray by carefully pulling it to the right using both hands.

Figure : Paper, remove
Load the removed pages back into the ADF.

Roller misfeed

Open the scanner lid.
Seize the misfeed paper, and remove the paper from the feed area by carefully pulling it to the right using both hands.

Figure : Paper, remove
Close the scanner lid. Then load the removed pages back into the ADF.