Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

hp-concentra-wrapper-portlet

Actions

HP Desktop PCs - motherboard specifications, Tana

Figure : The Tana motherboard

Motherboard description

HP name: Tana
SSID: 82F9

Form factor

Customized
Dimensions: 17x17 cm (6.7x6.7 in)

Chipset

The chipset on this motherboard is combined with the processor into a single integrated circuit called System on a Chip (SoC). This technology combines the processor and chipset functionality into a single physical package.

Processor upgrade information

Supports the Intel Pentium J4205 (Apollo Lake) Quad Core and Intel Celeron J3355 (Apollo Lake) Dual Core processors only.

Memory upgrade information

Dual channel memory architecture
Two DDR3L SODIMM (204-pin) sockets
Supports PC3L-12800 (DDR3L-1600)
Supports 2 GB, 4 GB, and 8 GB DDR3L SODIMMs
Supports up to 4 GB on 32-bit systems

note:
32-bit systems cannot address a full 4.0 GB of memory.
Supports up to 8 GB (unbuffered) on 64-bit computers

note:
Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.

Video

Integrated graphics

Integrated Intel HD Graphics

Audio

Integrated audio

Audio Codec: ALC3863-CG
High Definition (Azalia) 5.1 channel audio support

note:
The motherboard supports 5.1 surround sound. If the computer does not have the required audio jacks for a 5.1 configuration, additional hardware is required to use 5.1 surround sound.
Audio jack presence detection

note:
An internal speaker is not included with integrated audio. External speakers or headphones are required to hear sound.

Network

LAN: 1000BASE-T

Technology: Realtek RTL8161
Data transfer speeds: up to 10/100/1000 Mb/s
Transmission standards: 1000BASE-T Ethernet

Expansion slots

One M.2 socket 1, key A
One M.2 socket 3, key M

I/O Ports and clear password and CMOS

Back I/O ports

note:
The configuration might vary depending on your model (for example, if a dedicated graphics card is included). Any modifications or upgrades might change the configuration, port accessibility, and port functionality.

Figure : Tana back I/O panel

DC power in

VGA

HDMI out

USB 3.0: 2

USB 2.0: 2

LAN (Ethernet)

Audio: Line in

Audio: Line out

Audio: Microphone

Clear the password and CMOS

Clear Password: Remove the jumper from its default position and start the computer.

Clear CMOS: Move jumper one spot to the left (when the motherboard orientation is such that the text CMOS/PSW/BBR is below the pin block) and start the computer.

note:
Clearing the CMOS also clears the password.

Figure : Clear CMOS and clear password jumper in the default position

Clear CMOS pins

Jumper default position

hp-feedback-input-portlet

Actions

hp-feedback-banner-portlet

Actions

hp-country-locator-portlet

Actions

Country/Region: Africa

hp-detect-load-my-device-portlet

Actions

hp-hero-support-search

Actions

Examples: "Deskjet Ink Advantage K109 paper jam", "ProBook 4540s bios update"