hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP LaserJet Pro 500 color MFP M570 - Information about Tray 2

Tray capacity and paper orientation
To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For short/narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators.
Tray 2 capacity
Paper type
Specifications
Quantity
Paper
Range:
60 g/m2 to 220 g/m2
Equivalent to 250 sheets of 75 g/m2
Maximum stack height: 25 mm
For A5, A6, and 4x6 paper sizes, and for paper printed in a landscape orientation the maximum stack height is 15 mm,
Transparencies
Minimum: 0.102 mm thick
Maximum stack height: 25 mm
Glossy paper
Range:
105 g/m2 to 220 g/m2
100 sheets
Tray 2 paper orientation
Paper type
Image orientation
Duplex mode
How to load paper
Preprinted or letterhead
Portrait
1-sided printing
Face-up
Top edge at the right side of the tray
Figure : Paper orientation
2-sided printing
Face-down
Top edge at the left side of the tray
Figure : Paper orientation
Landscape
1-sided printing
Face-up
Top edge toward the back of the product
Figure : Paper orientation
2-sided printing
Face-down
Top edge toward the front of the product
Figure : Paper orientation
Prepunched
Portrait or landscape
1- or 2-sided printing
Holes toward the back of the product
Figure : Paper orientation
Load Tray 2
This tray holds up to 250 sheets of 75 g/m2 paper. If the paper is heavier, the tray does not hold as many sheets. Do not overfill the tray.
  caution:
Do not print envelopes, labels, postcards, or unsupported sizes of paper from Tray 2. Print these types of paper only from Tray 1.
  1. Slide open the tray.
      note:
    Do not open the tray while it is in use.
    Figure : Open the tray
  2. Adjust the paper-length and paper-width guides by squeezing the adjustment latch and sliding the guides to the size of the paper being used.
    Figure : Adjust the paper guides
  3. Load paper into the tray face-up. Check the paper to verify the guides lightly touch the stack, but do not bend it.
      note:
    To prevent jams, do not overfill the tray. Be sure the top of the stack is below the tray full indicator.
    Figure : Load paper in the tray
      note:
    If the tray is not adjusted correctly, an error message might display during printing or the paper might jam.
  4. Slide the tray into the product.
    Figure : Close the tray

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Africa

hp-detect-load-my-device-portlet

Actions
Loading...