• System weight: 5.04 kg (11.2 lb)
• Weight supported: 45.5 kg (100 lb)

• Operating: 5 G (with no damage being incurred)
• Non-operating: 20 G (with no damage being incurred)

• Operating: Random vibration at 0.000215 G²/Hz, 10 Hz to 300 Hz, (0.25 G nominal)
• Non-operating: Random vibration at 0.0005 G²/Hz, 10 Hz to 500 Hz, (0.5 G nominal)

• Operating (maximum wet bulb temperature, non-condensing): 10% to 90% relative humidity (Rh), 28°C
• Non-operating (maximum wet bulb temperature, non-condensing): 5% to 95% relative humidity (Rh), 38.7°C

• Operating: 0 to 3,048 m (10,000 ft) - This value may be limited by the type and number of options installed
• Non-operating: 0 to 9,144 m (30,000 ft)

  note:

Maximum allowable altitude change rate is 1500 ft/min.

• 1.7 GHz
• 1.9 GHz
• 2.0 GHz

• 128MB DDR Synch Dram PC2100 (266 MHz) Non ECC (1 x 128)
• 256MB DDR Synch Dram PC2100 (266 MHz) Non ECC (1 x 256)
• 384MB DDR Synch Dram PC2100 (266 MHz) Non ECC (1 x 128 + 1 x 256)
• 512MB DDR Synch Dram PC2100 (266 MHz) Non ECC (1 x 512)
• 512MB DDR Synch Dram PC2100 (266 MHz) Non ECC (2 x 256)
• 1GB DDR Synch Dram PC2100 (266 MHz) Non ECC (1 x 1024)
• 1GB DDR Synch Dram PC2100 (266 MHz) Non ECC (2 x 512)
• 2GB DDR Synch Dram PC2100 (266 MHz) Non ECC (2 x 1024)

• 20GB 7200 RPM SMART III Ultra ATA/100
• 40GB 5400 RPM SMART III Ultra ATA/100
• 40GB 7200 RPM SMART III Ultra ATA/100
• 80GB 5400 RPM SMART III Ultra ATA/100
• 80GB 7200 RPM SMART III Ultra ATA/100

• MultiBay 24X CD-ROM Drive
• MultiBay 8X DVD-ROM Drive with RAM Read
• MultiBay 24X CD-RW Drive
• MultiBay 24X Combo DVD-ROM and CD-RW Drive
• MultiBay 20GB Hard Drive

• 1.44MB Diskette Drive
• MultiBay Drives
• USB Disk-on-Key

• AC ‘97 Stereo Codec
• OPL3 FM Synthesis Support
• Sound Blaster Compatibility
• Sampling: 7 KHz to 48 KHz
• Compression: ADPCM, ESPCM
• Wavetable Syntheses (software)
• Internal Audio Speaker Power Rating: 3 W

• Bluetooth MultiPort Module
• 802.11b MultiPort Module

• PS/2 Easy Access Keyboard
• USB Easy Access Keyboard
• USB Smart Card Keyboard

• PS/2 2-Button Scroll Mouse
• USB 2-Button Scroll Mouse

• Serial Port: 1 with optional Legacy Module
• Parallel Port: 1 with optional Legacy Module
• PS/2: 2 with optional Legacy Module (1 Keyboard and 1 Mouse)
• USB 2.0: 5 ports (4 rear, 1 front)
• RJ-45 Network Port: 1
• Video (VGA): 1
• Multibay: 1
• Multiport: 1
• Mic-In: 1 (20 kohm input impedance)
• Line-In: 1 (12 kohm input impedance)
• Headphone-Out: 1 (2.5 ohm output impedance, expects at least a 32 ohm load)

• Mechanical Hood Security Provision
• Kensington Lock Support
• Cable Lock Provision

• Microsoft Windows 2000 SP2
• Microsoft Windows XP Professional SP1
• Microsoft Windows XP Home SP1
• Mandrake Linux 8.2 (only available on limited configurations)

• Norton Internet Security/Norton AntiVirus 2002
• Microsoft Office XP Small Business Edition/Professional Edition/Personal Edition
• Roxio CD Creator
• Intervideo DVD Player

• Monitors the temperature within the chassis.
• There are three operational states that a computer can experience:
  • NORMAL - operating under under normal temperature ranges.
  • ALERTED - operation when excessive temperatures are detected. Will raise a flag so that appropriate action can be taken to avoid shutdown or provide for a smoother system shutdown.
  • SHUTDOWN - when excessive temperatures are encountered. Will automatically shutdown the computer without warning before hardware component damage occurs.

• Assists with asset security and control by notifying the Network Administrator and end user when the cover has been removed without authorization.
• Is an electronic switch residing inside the computer which can be set to any one-of-three modes depending on the amount of control desired:
  • DISABLED - the network administrator does not want to be made aware of the computer hood removal.
  • NOTIFY USER - notifies network administrator that the hood has been removed, but no administrator action required before re-booting the computer.
  • UP PASSWORD – notifies network administrator that the hood has been removed and administrator password is required before re-booting the computer.

• Allow a system administrator to power on, restart, and power off a client computer from a remote location.
• This enables cost-effective power consumption when the administrator needs to distribute software, perform security management, or update the ROM.

• Advanced Configuration and Power Management Interface (ACPI).
• It allows the system to wake from a low power mode.
• It controls system power consumption, making it possible to place individual cards and peripherals in a low-power or powered-off state without affecting other elements of the system.