hp-support-head-portlet

Acciones
Cargando...
Soporte al cliente de HP: base de conocimientos

hp-contact-secondary-navigation-portlet

Acciones
Cargando...

hp-share-print-widget-portlet

Acciones
Cargando...

hp-concentra-wrapper-portlet

Acciones
Cargando...

HP Folio 13 Notebook PC - Removing and Replacing the Battery

Removing the battery

Before removing the battery, follow these steps:
  1. Shut down the computer. If unsure whether the computer is Off or in Hibernation, turn the computer On, and then shut it down through the operating system.
  2. Disconnect all external devices connected to the computer.
  3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
  4. Remove the base enclosure screws.
  5. Turn the computer right-side up, with the front towards.
  6. Disconnect the battery cable.
    Figura : Battery cable
  7. Remove the 2 Phillips PM 2.0×3.0 screws that secure the battery to the computer (1).
  8.   atención:
    Make sure that you balance the battery carefully so that it is not damaged.
    Support the display panel while lifting the battery slightly, and then slide it forward (2). Remove the battery from the computer (3).
    Figura : Battery

Replacing the battery

  1. Insert the battery into the computer.
  2. Replace the 2 Phillips PM 2.0 × 3.0 screws that secure the battery to the computer (1).
  3. Turn the top cover up, with the back edge away.
  4. Reconnect the battery cable.
  5. Replace the base enclosure screws.
  6. Reconnect the power to the computer by first plugging the power cord into the AC outlet and then plugging the AC adapter into the computer.
  7. Reconnect all external devices to the computer.
  8. Turn On the computer.

hp-feedback-input-portlet

Acciones
Cargando...

hp-feedback-banner-portlet

Acciones
Cargando...

hp-country-locator-portlet

Acciones
Cargando...
País/región: Flag Ecuador

hp-detect-load-my-device-portlet

Acciones
Cargando...