hp-support-head-portlet

Funktioner
Indlæser...
HP's kundesupport - Vidensbase

hp-contact-secondary-navigation-portlet

Funktioner
Indlæser...

hp-share-print-widget-portlet

Funktioner
Indlæser...

hp-concentra-wrapper-portlet

Funktioner
Indlæser...

HP Photosmart 325, 335, 375, and 385 - Installing Print Cartridges

  1. Open the print cartridge access door, then wait until the print cartridge carriage is idle and silent.
    Figur : Opening the print cartridge access door
  2. Press down on the end of the cartridge to release it.
    Figur : Releasing cartridge
  3. If you are installing a new print cartridge, remove the protective tape.
    Figur : Removing the protective tape
  4. Hold the print cartridge so the nozzles are down and the contacts face toward the printer, then slide the cartridge into the carriage.
    bemærk:
    Avoid touching the nozzles or contacts!
    1. Contacts
    2. Nozzles
    Figur : Installing the cartridge
  5. Press the cartridge into the carriage until it snaps into place.
  6. Close the print cartridge access door.

hp-feedback-input-portlet

Funktioner
Indlæser...

hp-feedback-banner-portlet

Funktioner
Indlæser...

hp-country-locator-portlet

Funktioner
Indlæser...
Land/område: Flag Danmark

hp-detect-load-my-device-portlet

Funktioner
Indlæser...