Error:

In diesem Browser ist JavaScript inaktiviert. Diese Seite erfordert JavaScript. Ändern Sie Ihre Browser-Einstellungen, damit JavaScript ausgeführt werden kann. Genauere Anweisungen hierzu finden Sie in der Dokumentation Ihres Browsers.

hp-support-head-portlet

Aktionen

Ladevorgang läuft...

HP Kundensupport - Wissensdatenbank

hp-contact-secondary-navigation-portlet

Aktionen

Ladevorgang läuft...

hp-share-print-widget-portlet

Aktionen

Ladevorgang läuft...

Informationen

Suchen Sie Hilfe zu Windows 11?
Finden Sie Infos und Tips zu Kompatibilität, Upgrade und Fehlerbehebungen von HP und Microsoft. Windows 11 Support Center

Informationen

Audio- oder Soundprobleme? Probieren Sie unseren automatisierten HP Audio Check aus!

Feedback

hp-concentra-wrapper-portlet

Aktionen

Ladevorgang läuft...

HP Deskjet 3050A Printers - Setting Up the Printer Hardware

Introduction

This document explains how to set up the physical parts of the product. Complete these steps before you install the product software on your computer.

Looking for the driver?

If you did not already set up the hardware, follow the steps in this document to do so first. But, if you already installed the hardware and are just looking for the driver to download, click this link HP Software and Driver Downloads. For instructions on how to install the software, here are some shortcuts:

Setting up the All-in-One

Follow these steps in order.

Vorsicht:
Do NOT connect the USB cable now. If you need a USB cable to connect the product to the computer, you will be prompted to connect it at the correct time during software installation.

Step one: Unpack the All-in-One

Remove the tape and cardboard from the outside of the printer.

Abbildung : Remove the tape from the outside of the printer
Open the front access door, open the cartridge access door, and then remove the tape and cardboard from inside the printer.

Abbildung : Remove the tape and cardboard from inside the printer
Close the cartridge access door.

Step two: Check the contents of the box

The contents might vary by country/region. See the packaging for a list of items shipped in the box.

Step three: Connect the power cord and adapter

Connect the power cord to the back of the printer.

Abbildung : Connect the power cord into the back of the printer
Connect the power cord to the power supply, and then into a power outlet in the wall.

Abbildung : Connect the power cord to the power supply, and then into a power outlet in the wall

Step four: Lift the control panel display

Lift the control panel display.

Abbildung : Lift the control panel screen

Step five: Turn on the power

Press the Power button to turn on the printer.

Abbildung : Turn on the printer

Step six: Select the language and region

When the printer is first turned on, the control panel prompts you to select the language and the region. Use the following steps to set the default language and country/region for your printer.

Press the button () next to the Down Arrow () to scroll through the languages.
Press the button () next to OK, and then select Yes to confirm the language choice. The Country/Region screen displays.
Press the button () next to the Down Arrow () to scroll through and select your desired region.
Press the button () next to OK, and then select Yes. A 'Thank you for using HP' message displays.
Press the button () next to OK, and the cartridge installation process begins.

Abbildung : Select your language and region from the printer control panel

Step seven: Install the cartridges

Open the cartridge access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before continuing.

Abbildung : Open the cartridge access door
Remove the new cartridge from its packaging, and then carefully pull the pink pull tab to remove the plastic tape.

Vorsicht:
Do not touch the copper-colored contacts or ink nozzles. Also, donot re-tape the cartridges. Doing so can result in clogs, ink failure, and badelectrical connections.

Abbildung : Remove the plastic tape
Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot.
- The tri-color cartridge goes in the slot on the left.
- The black cartridge goes in the slot on the right.
Abbildung : Insert the cartridge into its slot
Push the cartridge forward into its slot until it snaps into place.

Abbildung : Snap the cartridge into place
Repeat these steps to insert the other cartridge.
Close the cartridge access door.

Abbildung : Close the cartridge access door

Step eight: Load plain paper

Raise the input tray.

Abbildung : Raise the input tray
Pull out the tray extender.

Abbildung : Pull out the tray extender
Slide the paper width guide to its outermost position.

Abbildung : Slide the paper width guide outward
Load the paper into the input tray, and then slide the paper width guide inward to rest against the edge of the paper.

Abbildung : Load plain, white paper into the input tray
Press the button () next to OK to print an alignment page.

Step nine: Align the cartridges

Lift the scanner lid.
Place the alignment page with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

Abbildung : Place the alignment page on the scanner glass
Close the scanner lid.

Abbildung : Close the scanner lid
Press the button () next to OK. The scanner scans the page and completes the alignment process.

Getting started with ePrint

Now you can stay connected and productive on the go with ePrint. ePrint lets you print directly to your ePrint-enabled HP printer using a smartphone, notebook, or other mobile device. For additional information related to setting up and using ePrint, click the link provided.