HP OfficeJet 3830, DeskJet 3830, 5730 Printers - Replacing the Ink Cartridges

Poznámka:

If you are enrolled in the HP Instant Ink program, you receive special HP Instant Ink cartridges. Some HP Instant Ink cartridges are larger than standard ink cartridges, but they fit in the carriage in the same way. HP Instant Ink is not available in all countries/regions or for all printer models. For more information, go to HP Instant Ink.

1. Standard ink cartridge
2. HP Instant Ink cartridge

1. Turn on the printer.
2. Load plain white paper into the input tray.
3. Close the output tray extender, and then push the output tray back into the printer.
   
4. Open the exterior door.
   
5. Open the ink cartridge access door.
   The carriage moves to the center of the printer.
   
6. Wait until the carriage stops moving before you continue.
7. Lightly press down on the ink cartridge to release it, and then pull the ink cartridge out of its slot.
   
8. Remove the new ink cartridge from its packaging, and then remove the plastic tape.

     Upozornění:

   Do not try to remove the copper electrical strip.

   Do not touch the copper-colored contacts or the ink nozzles.Do not replace the protective tape on the contacts. Handling these parts can result in clogs, ink failure, and bad electricalconnections.

   
9. Hold the ink cartridge by its sides with the nozzles toward the printer, and then insert the ink cartridge into its slot. Make sure the ink cartridge is inserted in the correct slot.
   • The tri-color ink cartridge goes in the slot on the left.
   • The black ink cartridge goes in the slot on the right.
10. Push the ink cartridge forward into its slot until it snaps into place.
    
11. Repeat these steps to replace the other ink cartridge, if necessary.
12. Close the ink cartridge access door.
    
13. Close the exterior door.
    
14. Pull out the output tray, and then lift the output tray extender.
    
15. Press OK to align the ink cartridges.
    An alignment page prints.

1. Lift the scanner lid.
2. Place the alignment page with the print side down on the scanner glass, and then position it according to the engraved guides around the glass.
   
3. Close the scanner lid.
4. Touch OK to scan the page and complete the ink cartridge alignment.