Loading Paper and Envelopes for the HP Deskjet 1050, 1050A, 2050, and 2050A, and Deskjet Ink Advantage 2060 All-in-One Printer Series

1. Raise the input tray.
   Obrázek : Raise the input tray

   
2. Lower the output tray, and then pull out the tray extender.
   Obrázek : Pull out the tray extender

   
3. Slide the paper width guide to its outermost position.
   Obrázek : Slide the paper width guide to its outermost position

   
4. Load a stack of plain paper into the input tray, print-side facing toward you. Slide the stack of paper in until it stops.
   Obrázek : Load paper

   
5. Slide the paper width guide snugly against the paper.
   Obrázek : Slide the paper width guide snugly against the paper

   

1. Raise the input tray.
   Obrázek : Raise the input tray

   
2. Lower the output tray, and then pull out the tray extender.
   Obrázek : Pull out the tray extender

   
3. Slide the paper width guide to the left.
   Obrázek : Slide the paper width guide to the left

   
4. Load a stack of photo paper into the input tray with the short edge down and print-side facing toward you. Slide the stack of paper in until it stops.

   Poznámka:

   If the photo paper you are using has perforated tabs, load the paper so that the tabs are on top.

5. Slide the paper width guide inward until it stops at the edge of the paper.
   Obrázek : Slide the paper width guide inward

   

   Poznámka:

   Do not leave any photo paper in the input tray after you finish printing, as the quality of the paper might deteriorate. Store photo paper in a sealed bag in a cool, dark place.

Poznámka:

You can load one or more envelopes in the tray, but do not load more than five envelopes at a time. Do not use shiny or embossed envelopes or envelopes that have clasps or windows.

1. Raise the input tray.
   Obrázek : Raise the input tray

   
2. Lower the output tray, and then pull out the tray extender.
   Obrázek : Pull out the tray extender

   
3. Slide the paper width guide to the left.
   Obrázek : Slide the paper width guide to the left

   
4. Load one or more envelopes into the far-right side of the input tray with the print-side facing toward you and with the flap on the left-side, and then slide the paper width guide inward until it stops at the edge of the envelopes.
   Obrázek : Load envelopes