hp-support-head-portlet

操作
正在装入...
HP 客户支持 - 知识库

hp-contact-secondary-navigation-portlet

操作
正在装入...

hp-share-print-widget-portlet

操作
正在装入...
  • 信息
    Windows 11

    要寻找常见问题与解答,请前往此处

    信息

    修复并解决 HP计算机或打印机的Windows 10更新问题。单击此处

    信息

    音频或声音问题?试试我们的自动HP音频检测!

    信息
    中国惠普提醒您:

    注意个人防护,勤洗手,多通风,少聚集。 同时我们推荐您关注“惠普服务”公众号获取 更多便捷服务。

  • 反馈

hp-concentra-wrapper-portlet

操作
正在装入...

Loading Paper for the HP LaserJet Pro P1566 and P1606dn Printers

  警告:
If you try to print on media that is wrinkled, folded, or damaged in any way, a jam might occur.

Priority input slot

The priority input slot holds up to ten sheets of media or one envelope, one transparency, or one sheet of labels or cardstock. Load media with the top forward and the side to be printed on facing up. To prevent jams and skewing, always adjust the side media guides before feeding the media.

Main-input tray

The main-input tray holds 250 pages of 75 g⁠/⁠m2 paper, or fewer pages of heavier media (a 25 mm stack height or less).
Load media with the top forward and the side to be printed on facing up. To prevent jams and skewing, always adjust the side and front media guides.
注意:
When you add new media, make sure that you remove all of the media from the input tray and straighten the entire stack. This helps prevent multiple sheets of media from feeding through the product at one time, reducing media jams.

Paper orientation for loading trays

Only use media that is recommended for laser printers.
If you are using paper that requires a specific orientation, load it according to the information in the following table.
Paper type
How to load paper
Preprinted or letterhead
  • Face up
  • Top edge leading into the product
Prepunched
  • Face up
  • Holes toward the left side of the product
Envelope
  • Face up
  • Left short edge leading into the product
注意:
Use the priority input slot for printing one envelope or other special media. Use the main-input tray for printing multiple envelopes or other special media.
  1. Before loading the media, slide the media guides outward to slightly wider than the media.
    图片 : Slide media guides outward
  2. Place the media in the tray and adjust the media guides to the correct width.
    图片 : Place media and adjust guides

hp-feedback-input-portlet

操作
正在装入...

hp-feedback-banner-portlet

操作
正在装入...

hp-country-locator-portlet

操作
正在装入...
国家/地区: Flag 中国

hp-detect-load-my-device-portlet

操作
正在装入...