hp-support-head-portlet

操作
正在装入...
HP 客户支持 - 知识库

hp-contact-secondary-navigation-portlet

操作
正在装入...

hp-share-print-widget-portlet

操作
正在装入...
  • 信息
    Windows 11

    要寻找常见问题与解答,请前往此处

    信息

    修复并解决 HP计算机或打印机的Windows 10更新问题。单击此处

    信息

    音频或声音问题?试试我们的自动HP音频检测!

    信息
    中国惠普提醒您:

    注意个人防护,勤洗手,多通风,少聚集。 同时我们推荐您关注“惠普服务”公众号获取 更多便捷服务。

  • 反馈

hp-concentra-wrapper-portlet

操作
正在装入...

HP LaserJet Pro P1566 and P1606dn Printers - Setting Up the LaserJet (Hardware)

Introduction

This document explains how to set up the physical parts of the product. Complete these steps before you install the product software on your computer.
This document includes the following steps to set up the printer:
  • Check the contents of the box
  • Remove packing tape
  • Prepare the print cartridge
  • Prepare the trays
  • Load plain paper
  • Connect the power cord
  • Turn on power

Setting up the printer

Follow these steps in order.

Step one: Check the contents of the box

Remove the printer from the box, and then check the contents of the box.
The contents might vary by country/region. See the packaging for a list of items shipped in the box.

Step two: Remove packing tape

Remove all packing tape from the printer.

Step three: Prepare the print cartridge

  1. Open the print cartridge door.
    图片 : Open the print cartridge door
    Illustration: Open the print cartridge door.
  2. Lift up the paper packing, but do not remove it.
    图片 : Lift the paper packing
    Illustration: Lift the paper packing.
  3. Remove the print cartridge packaging.
    图片 : Remove the print cartridge packaging
    Illustration: Remove the print cartridge packaging.
  4. Remove the print cartridge from the printer.
    图片 : Remove the print cartridge
    Illustration: Remove the print cartridge.
      警告:
    To prevent damage to the print cartridge, hold the print cartridge at each end.
  5. Remove the packaging from inside the printer.
    图片 : Remove the packaging from inside the printer
    Illustration: Remove the packaging from inside the printer.
  6. Remove the orange clip from the end of the print cartridge.
    图片 : Remove the orange clip from the print cartridge
    Illustration: Remove the orange clip from the print cartridge.
  7. Gently rock the print cartridge back and forth to distribute the toner evenly.
    图片 : Rock the print cartridge
    Illustration: Rock the print cartridge.
  8. Bend the tab on the left side of the print cartridge until the tab breaks loose. Pull the tab to remove all the sealing tape from the print cartridge.
    图片 : Remove the sealing tape
    Illustration: Remove the sealing tape.
      警告:
    If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric.
  9. Insert the print cartridge, and then close the print cartridge door.
    图片 : Insert the print cartridge and close the door
    Illustration: Insert the print cartridge and close the door.

Step four: Prepare the trays

  1. Insert the output tray.
    图片 : Insert the output tray
    Illustration: Insert the output tray.
  2. Insert the priority input tray.
    图片 : Insert the priority input tray
    Illustration: Insert the priority input  tray

Step five: Load plain paper

  1. Raise the priority input tray, and then slide the paper length and width guides to their outermost positions.
    图片 : Slide out paper guides
    Illustration: Slide out paper guides.
  2. Load plain paper in the main input tray with the top forward and the print side up.
    图片 : Load paper
    Illustration: Load paper into the main input tray.
  3. Slide the paper guides inward so that they rest against the stack of paper.
    注意:
    To prevent jams and skewing, always adjust the side and front paper guides.
    图片 : Adjust the paper guides
    Illustration: Adjust the paper guides
  4. Lower the priority tray.
    图片 : Lower the priority tray
    Illustration: Lower the priority tray.

Step six: Connect the power cord

  1. Connect the power cord to the back of the printer.
    图片 : Connect the power cord
    Illustration: Connect the power cord to back of printer
  2. Plug the power cord into an electrical outlet.

Step seven: Turn on power

Press the Power button to turn on the printer.
图片 : Turn on the power
Illustration: Turn on the power.
注意:
A blank page might print when you turn on the printer for the first time.

hp-feedback-input-portlet

操作
正在装入...

hp-feedback-banner-portlet

操作
正在装入...

hp-country-locator-portlet

操作
正在装入...
国家/地区: Flag 中国

hp-detect-load-my-device-portlet

操作
正在装入...