hp-support-head-portlet

操作
正在装入...
HP 客户支持 - 知识库

hp-contact-secondary-navigation-portlet

操作
正在装入...

hp-share-print-widget-portlet

操作
正在装入...
  • 信息
    Windows 11

    要寻找常见问题与解答,请前往此处

    信息

    修复并解决 HP计算机或打印机的Windows 10更新问题。单击此处

    信息

    音频或声音问题?试试我们的自动HP音频检测!

    信息
    中国惠普提醒您:

    注意个人防护,勤洗手,多通风,少聚集。 同时我们推荐您关注“惠普服务”公众号获取 更多便捷服务。

  • 反馈

hp-concentra-wrapper-portlet

操作
正在装入...

HP Photosmart C5300 All-in-One Series - Replacing Ink Cartridges

Introduction

This document contains steps for installing replacement ink cartridges.
Steps for installing ink cartridges for the first time are not included in this document. For steps on installing cartridges for the first time, try one of the following options:

Replacing ink cartridges

Follow these steps in the order presented to replace the ink cartridges.
  警告:
Wait until the new ink cartridge is available before removing the old ink cartridge. Do not leave the ink cartridge outside of the product for an extended period of time. This can result in damage to both the product and the ink cartridge.

Step one: Make sure the cartridge is compatible with the product

Purchase replacement cartridges and other supplies from the HP Store or local retailers.
If you've installed the product software, check the Toolbox in HP Solution Center. To open the Toolbox, follow these steps:
  1. Open HP Solution Center:
    • Windows XP: Click Start, click All Programs, point to HP, and then click HP Solution Center.
    • Windows Vista: Click the Windows icon (), click All Programs, point to HP, and then click HP Solution Center.
    HP Solution Center opens in a new window.
  2. Click Settings ().
  3. Under Print Settings, click Printer Toolbox. The printer Toolbox opens in a new window.
  4. Click the Estimated InkLevels tab, and then click Shop online.

Step two: Open the product

  1. If the product is not already on, press the Power button () to turn it on.
  2. Open the cartridge door by lifting from the front right of the product until the door locks into place in the upright position.
    图片 : Open the cartridge door
    The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.

Step three: Replace the old ink cartridges

  1. Press the tab on the front of the ink cartridge that is being replaced to release it, and then remove it from the slot.
    图片 : Remove the ink cartridge
      警告:
    Do not lift the gray latch next to the carriage to install the ink cartridges. Doing so can result in incorrectly seated ink cartridges and printing problems. The latch must remain down in order to correctly install the ink cartridges.
  2. On the new cartridge, pull the orange pull-tab straight back to remove the plastic wrap.
    图片 : Remove the plastic wrap
  3. Twist the orange cap counter-clockwise to snap it off.
    图片 : Remove the orange cap
  4. With the cartridge contacts facing the printhead, slide the cartridge into the appropriate slot as indicated by the color-coded icons on the cartridge and in the printhead.
    图片 : Insert the ink cartridge
  5. Press down on the ink cartridge until it clicks firmly into place.
    图片 : Press the ink cartridge into place
  6. Repeat these steps for each cartridge you are replacing.
  7. Close the ink cartridge door. The carriage moves back to the right side of the product.
    图片 : Close the ink cartridge access door

hp-feedback-input-portlet

操作
正在装入...

hp-feedback-banner-portlet

操作
正在装入...

hp-country-locator-portlet

操作
正在装入...
国家/地区: Flag 中国

hp-detect-load-my-device-portlet

操作
正在装入...