hp-support-head-portlet

操作
正在装入...

欢迎来到惠普客户支持

hp-contact-secondary-navigation-portlet

操作
正在装入...

hp-share-print-widget-portlet

操作
正在装入...

hp-concentra-wrapper-portlet

操作
正在装入...

iPAQ 和带有万通宝笔记本通过蓝牙方式同步的设置方法


Hewlett Packard Wireless Solutions
Version 1.2, August 2002
How to use Activesync with the 3870/3970/Bluetooth wireless pack and Multiport
Background:
This document will describe how to use Activesync over Bluetooth with the iPAQ 3870/3970 or any other iPAQ with a Bluetooth wireless pack. There are different ways of creating the Bonding. I have chosen to initiate everything from the iPAQ in this guide.
Prerequisite:
This installation guide was done using the following hardware and software. If you are using a later version there might be some changes in the steps below Hardware: iPAQ H3870, EVO N400c with Multiport Software: Bluetooth manager (Already installed into ROM on H3870). BT Manager on PC and Active sync
Versions of Firmware/Software used:
iPAQ 3870 with ROM version 2.20.21
Bluetooth manager 1.1
EVO N400c with Bluetooth Multiport 1.1.25
ActiveSync 3.5
Installation guide:
  1. Install Activesync from CD or download from http://www.microsoft.com/mobile/pocketpc/downloads/activesync35.asp. Connect at least one time to create a partnership.
  2. Install the bluetooth software on your EVO laptop from the CD or download from http://www.compaq.com/support/files/evonotebook/us/download/13523.html
  3. Open the Bluetooth configuration by left clicking the bluetooth icon in systray. Name the computer under General\Computer name. My laptop"s name is "JANSSONMAGXP"
  4. On the iPAQ, check if the radio is turned on. If the Bluetooth icon in the lower right corner is dark like in the left picture below it is turned off. Turn it on by pressing the icon and choose "Turn radio ON". When the radio is turned ON like in the right picture below go to next step.
  5. On the iPAQ open Bluetooth Manager and press search. Check the check box. Press save then ok in the upper left corner. The Star indicates that it is a new Bluetooth device.
  6. Click on the PC device name in the BT manager. All the available services will be presented under the actions menu. Press "Actions" menu and "Create bond with this device". Enter a Pin code for example 1234 and press OK.
  7. On the PC you will get a message "Bluetooth connection request detected". Press the Bluetooth icon in systray. Enter the pin you used on the iPAQ and press authenticate.
  8. On the iPAQ you should have a "Bond successfully created ". Tick the ActiveSync Partner tick box.
  9. On the Laptop open ActiveSync. File\connection settings. Choose Com6 press "OK". If Com 6 does not work try the other comports as some application can take ownership of certain comports.
  10. On the iPAQ choose "Start ActiveSync" in the lower right hand corner of the today screen.
  11. It should look like this when you are connected. Disconnect by pressing the connection icon on the right picture

hp-feedback-input-portlet

操作
正在装入...

hp-online-communities-portlet

操作
正在装入...

来论坛寻求专家们的帮助!


客户支持论坛

客户支持论坛

专注于电脑、打印机、平板电脑、手机等产品,欢迎加入论坛,参与讨论,分享您的产品使用技巧与经验。 立即访问


hp-feedback-banner-portlet

操作
正在装入...

hp-country-locator-portlet

操作
正在装入...
国家/地区: 中国

hp-detect-load-my-device-portlet

操作
正在装入...