Cartridge replacement animation

Click the play button above (

) to see an animation on how to replace print cartridges, or continue to the sections below for detailed instructions.

Step 2 - Remove old cartridges

Press down lightly on top of the cartridge latch.
Pull out the bottom of the latch to unhook it.
Slide the cartridge out.

图片 : Open the cartridge latch

图片 : Slide the cartridge out

Step three: Use a cartridge protector

If you are temporarily removing a working cartridge (for instance, removing a Black cartridge in order to install a Photo cartridge), put it in a cartridge protector. Cartridge protectors come with Photo cartridges.

图片 : Insert a cartridge into a cartridge protector

图片 : To remove, press down on the latch

Step 4 - Make sure the new cartridges are compatible

Purchase replacement cartridges and other supplies from the HP Store or local retailers.

Step 5 - Install the new cartridges

If you are installing a new print cartridge, remove the protective tape.

警告：
Do not attempt to remove the copper strip.

图片 : Remove the protective tape

警告：
After the tape is removed, do not touch the copper contacts or the ink nozzles.
图片 : Contacts and nozzles

Contacts

Nozzles
Hold the print cartridge so the nozzles are down and the contacts face toward the printer, then slide the cartridge into the carriage.
- Cartridges marked with a triangle go into the left carriage slot.
- Cartridges marked with a square or pentagon go into the right carriage slot.
图片 : Put each cartridge into the proper slot
Push down on the print cartridge latch until it snaps closed.

图片 : Slide the print cartridge in

图片 : Close the latch
Close the printer cover.