HP LaserJet Enterprise MFP - Changing default scan/send settings from the printer control panel

note:

The steps vary according to the type of control panel.

1. From the Home screen on the printer control panel, scroll to and select the Administration button.
2. Open the Scan/Digital Send Settings menu.
3. Select the category of scan and send settings that you want to configure.
4. Open the Default Job Options menu, and configure the options. Select Save to save the settings.

1. From the Home screen on the printer control panel, select Settings, and then open the Scan/Digital Send menu.
2. Select the category of scan and send settings that you want to configure.
3. Configure the options. Select Done for each setting, if prompted.